OVER A DECADE OF SERVICE (EST. 2013)

SturdyONE Spares Kit By Sturdy MFG

£ 14.99

0 review  |  Write a review

SturdyONE Spares Kit By Sturdy MFG Contents:
• 1 set of all o-rings and seals in Clear (except custom base o-ring)
• 1 set of all o-rings and seals in Black (including custom base o-ring)
• Slotted grub screws • top and bottom PEEK deck insulators,
• Brass pin attachment for Black PEEK Boro adaptor.
• Comes with Printed ziplock bag packaging *does not include the Black PEEK Boro adaptor itself.

In stock

Purchase & earn 75 points!
SKU: STU-SPA-KIT Categories: , Tags: , , , ,

This product is for advanced users only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 10 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • SturdyONE RBA By Sturdy MFG is a convertible rebuildable base atomizer that is very well constructed, simple to use, and a high performance rebuildable atomizer.
    The SturdyONE can either be used in a normal sized Boro Tank, or as a complete dotAIO RBA and tank replacement.

    Included are different air flow pins to adjust your draw resistance as desired, along with spare silicone gaskets in both clear or black to change according to your desired setups.

    Wire lead trap recess is machined into the deck to aid in building and allow for easier rebuilding.

    Domed evaporation chamber cap results in smoother airflow movement for greater flavour yield.

    Specifications:
    • 4.5mm diameter chimney
    PCTG (Clear) dotAIO sized proprietary tank
    SS316 (Food Grade) chimneys, cap, deck, base, Dot adapter
    SS316 (Food Grade) slotted post screws
    SS304 airflow pins
    PEEK insulators
    Black PEEK & Brass Boro adapter
    Silicone & Nitrile o-rings/Fill plug
    Dual platform friendly (dotAIO & Boro Tank)
    Direct wicking system for constant and fast liquid flow
    Reduced chamber cap with dome system for increased flavour production and airflow smoothing
    Built-in 510 threading for easy coil building
    Reverse threaded chimney to avoid Boro dumps
    Spare kit provided in case you lose something
    Support coils up to a maximum of 3.5mm in diameter
    1.0mm, 2.0mm, 2.5mm (installed), 3.0mm & 3.5mm airflow pins
    Takes upto 4.2ml of liquid in dotAIO mode

    SturdyOne Spare Parts Kit
    SturdyOne 1.2, 1.5, 4mm Airflow Pin Kit 
    SturdyOne Replacement Tanks
    SturdyTip Hybrid for Boro & DotAio
    SturdyCoils Alien RBA Fused Clapton

    Original price was: £ 89.99.Current price is: £ 79.99.
    Purchase & earn 400 points!Add to basket
  • DotAio 510 Rebuilding Tool By 909 Modify is designed for DotMod DotAIO V1 & V2. It provides a platform for re-wicking and dry firing when placed inside a DotAIO. With a direct 510 connection, users are no longer need to carry any 510 mod, just one simple rebuilding tool serves the same purpose. 909 rebuilding tool is also equipped with 2 hidden coil jigs for your daily builds.

    Specifications:
    • Compatible With Dotmod DotAIO V1 & V2 + Lite
    • Equipped with 2 coil jigs (2.5mm & 3.0mm)
    • Gold Plated Contact For Better Conduction.
    • Stainless Steel Construction

    Original price was: £ 29.99.Current price is: £ 23.99.
    Purchase & earn 120 points!Add to basket
  • SturdyONE Airflow Pin Kit By Sturdy MFG Contents:
    • 1.2mm, 1.5mm & 4mm airflow pins.
    • Comes with Printed ziplock bag packaging.

    Note: All Batch 1 RBA’s came stock with the 4mm AF pin. All Batch 2 SturdyONE RBA’s will be as stated on the box, 1.0, 2.0, 2.5 (installed), 3.0 & 3.5mm airflow pin.

    £ 19.99
    Purchase & earn 100 points!Add to basket
  • SturdyONE Replacement Tanks By Sturdy MFG

    Colours:
    • Clear (stock) (Clear fillplug installed, Black spare)
    • Frosted (Clear fillplug installed, Black spare)
    • Smoked (Black fillplug installed, Clear spare)
    • Ultem (Black fillplug installed, Clear spare)

    1 x Tank comes with hard plastic sleeve & EVA foam packaging
    Note: All tank sections are the moulded PCTG (as per the stock one that comes with the RBA) part ONLY, they will not include the stainless steel base.

    £ 14.99
    Earn up to 75 points.Select options
×
×
×
×