SturdyONE RBA By Sturdy MFG

Original price was: £ 89.99.Current price is: £ 79.99.

(1 customer review)
1 review  |  Write a review

SturdyONE RBA By Sturdy MFG is a convertible rebuildable base atomizer that is very well constructed, simple to use, and a high performance rebuildable atomizer.
The SturdyONE can either be used in a normal sized Boro Tank, or as a complete dotAIO RBA and tank replacement.

Included are different air flow pins to adjust your draw resistance as desired, along with spare silicone gaskets in both clear or black to change according to your desired setups.

Wire lead trap recess is machined into the deck to aid in building and allow for easier rebuilding.

Domed evaporation chamber cap results in smoother airflow movement for greater flavour yield.

• 4.5mm diameter chimney
PCTG (Clear) dotAIO sized proprietary tank
SS316 (Food Grade) chimneys, cap, deck, base, Dot adapter
SS316 (Food Grade) slotted post screws
SS304 airflow pins
PEEK insulators
Black PEEK & Brass Boro adapter
Silicone & Nitrile o-rings/Fill plug
Dual platform friendly (dotAIO & Boro Tank)
Direct wicking system for constant and fast liquid flow
Reduced chamber cap with dome system for increased flavour production and airflow smoothing
Built-in 510 threading for easy coil building
Reverse threaded chimney to avoid Boro dumps
Spare kit provided in case you lose something
Support coils up to a maximum of 3.5mm in diameter
1.0mm, 2.0mm, 2.5mm (installed), 3.0mm & 3.5mm airflow pins
Takes upto 4.2ml of liquid in dotAIO mode

SturdyOne Spare Parts Kit
SturdyOne 1.2, 1.5, 4mm Airflow Pin Kit 
SturdyOne Replacement Tanks
SturdyTip Hybrid for Boro & DotAio
SturdyCoils Alien RBA Fused Clapton

In stock

Purchase & earn 400 points!
SKU: STU-ONE-RBA-SS Categories: , , Tags: , , ,

SturdyONE RBA By Sturdy MFG
Diameter : 20.0mm
Height : 34.8mm
Weight : 18.4g

This product is for advanced users only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 110 g

1 review for SturdyONE RBA By Sturdy MFG

  1. daveanderson (verified owner)

    Absolutely love my Sturdy One. Very good machining and tolerances. Flavour is on point in both boro and dot mode (dual compatibility) Unbeatable value at this price point. Easily up there with rba’s at twice the price. Buy it. Excellent service from cv. Quick delivery

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • SturdyONE Replacement Tanks By Sturdy MFG

    • Clear (stock) (Clear fillplug installed, Black spare)
    • Frosted (Clear fillplug installed, Black spare)
    • Smoked (Black fillplug installed, Clear spare)
    • Ultem (Black fillplug installed, Clear spare)

    1 x Tank comes with hard plastic sleeve & EVA foam packaging
    Note: All tank sections are the moulded PCTG (as per the stock one that comes with the RBA) part ONLY, they will not include the stainless steel base.

    £ 14.99
    Earn up to 75 points.Select options
  • SturdyONE Spares Kit By Sturdy MFG Contents:
    • 1 set of all o-rings and seals in Clear (except custom base o-ring)
    • 1 set of all o-rings and seals in Black (including custom base o-ring)
    • Slotted grub screws • top and bottom PEEK deck insulators,
    • Brass pin attachment for Black PEEK Boro adaptor.
    • Comes with Printed ziplock bag packaging *does not include the Black PEEK Boro adaptor itself.

    £ 14.99
    Purchase & earn 75 points!Add to basket
  • SturdyONE Airflow Pin Kit By Sturdy MFG Contents:
    • 1.2mm, 1.5mm & 4mm airflow pins.
    • Comes with Printed ziplock bag packaging.

    Note: All Batch 1 RBA’s came stock with the 4mm AF pin. All Batch 2 SturdyONE RBA’s will be as stated on the box, 1.0, 2.0, 2.5 (installed), 3.0 & 3.5mm airflow pin.

    £ 19.99
    Purchase & earn 100 points!Add to basket
  • Alien RBA Clapton By Sturdy MFG X Adria Builds: Award winning prebuilt clapton coils using Twisted Messes outer wire and Kookpunt inner wire. Professionally built, each coil is tightly wrapped with a 2.5mm inner diameter ready to be installed into your favourite RBA, RDA, RTA, RDTA, or Boro Bridge.

    • Alien Fused Clapton
    • 2 x27g X 37g
    • Dual Core
    • NI80
    • 5 Wrap~
    • ~0.3 ohm
    • Internal Diameter: 2.5mm
    • Outer Diamater: 4mm
    • Length: 4.75mm
    • Contents: 1 pack: 2 coils
    • Made In Indonesia

    £ 8.99
    Purchase & earn 45 points!Add to basket