The UK's #1 Advanced Vape Store

squonk

Display:  List Grid

Showing 1–16 of 27 results

    • You asked and we answered with the Rye v1.2 RDA. The width between the dual posts has been greatly reduced and they are now perfectly centered. The deck is almost 50% more convex and It features a stunning 4.2mm long chamfer on both sides of the upper level cyclops airflow intake. The intake is chamfered at a precise 45° angle all the way to a perfect 5mm x 1mm intake on the back end of the inner AFC tab. This is a smaller and a more precise opening than on the original Rye. The included robust hex tool has been revised, so grub screws are even less likely to strip than they were before.

      Features:
      • 24mm Stainless Steel RDA
      • PVD Coated Black Version
      • Convex Deck With 50% Gradient
      • Double Decker Airflow Intake
      • Adjustable Top & Bottom Airflow Intake
      • Black Delrin 7.25mm Bore Proprietary 810 Tip
      • Black Delrin 10mm Bore 810 Tip
      • Black Delrin 810 To 510 Converter
      • Silver Plated Copper 510 Pin
      • PEEK Insulators + SS Squonk Pin
      • Serialised + Revised Anti-strip Allen Key
      • Extra 510 Pin, Mod Protective Discs, O-rings, Screws

      £ 57.99£ 59.99
    • A successor to the DRUGA RDA, featuring revised Clamp Snag System build deck bundled in a visually striking aesthetic. Constructed from superior 304 Stainless steel, the chassis is well constructed and visually striking. Implemented within the build deck is an upgraded clamp snag system to maintain ease of building, accommodating a single or dual coil configuration. In addition, the top cap features a dual sided airflow control, offering control over airflow intake. At the bottom is a threaded 510 connection to facilitate connectivity through a swappable gold plated pin or bottom fed squonk pin, allowing eJuice to travel through the bottom from your favorite squonk mod.

      Features:
      • 24mm Diameter
      • Deep Juice Wells
      • Superior 304 Stainless Steel Construction
      • Upgraded Clamp Snag System
      • Gold Plated Build Deck Posts
      • Single or Dual Coil Configuration
      • PEEK Insulator
      • Dual Sectioned Airflow Control Top Cap
      • 810 Widebore Drip Tip
      • Threaded 510 Connection – Gold Plated Contact Pin
      • Gold-Plated BF Squonk Pin

      £ 29.99 £ 19.99
    • New Defiant Designs Silicone Squonk Bottle Cap System

      Product Details:
      • One complete cap system and one bottle of your choice
      • 9ml capacity
      • Black Delrin Cap System
      • Travel ready
      • Food grade silicone bottle

      1 x Silicone Bottle Cap System

      £ 13.99
    • A collaboration by 99 Wraps x Blue Eyed Goon. The Rye RDA is named in memory of Ryan Masa – @vape_rye on Instagram. Rye was tragically taken from us far too soon, and we hope our homage to him and his work is worthy, and does your exquisite reputation for excellence justice. A portion of the proceeds from the sale of every Rye RDA will be donated to Rye’s family. Thank you greatly for your patronage.

      Features:
      • 24mm Stainless Steel RDA
      • Convex Deck With 2mm Gradient
      • Double Decker Airflow Intake
      • Adjustable Top & Bottom Airflow Intake
      • Black Delrin 7.25mm Bore Proprietary 810 Tip
      • Black Delrin 10mm Bore 810 Tip
      • Stainless Steel 3mm Bore 810 Tip
      • Black Delrin 810 To 510 Converter
      • Silver Plated Copper 510 Pin
      • PEEK Insulators + SS Squonk Pin
      • Serialised + Anti-strip Allen Key
      • Extra 510 Pin, O-rings & Screws

      £ 62.99 £ 45.00
    • The Rye RDA is named in memory of Ryan Masa – @vape_rye on Instagram. Rye was tragically taken from us far too soon, and we hope our homage to him and his work is worthy, and does your exquisite reputation for excellence justice. A portion of the proceeds from the sale of every Rye RDA will be donated to Rye’s family. Thank you greatly for your patronage.

      This discounted bundle includes the Rye RDA with the Media Blasted Stainless Steel and Ultem Cloud Caps.

      Features:
      • 24mm Stainless Steel RDA
      • Convex Deck With 2mm Gradient
      • Double Decker Airflow Intake
      • Adjustable Top & Bottom Airflow Intake
      • Black Delrin 7.25mm Bore Proprietary 810 Tip
      • Black Delrin 10mm Bore 810 Tip
      • Stainless Steel 3mm Bore 810 Tip
      • Black Delrin 810 To 510 Converter
      • Silver Plated Copper 510 Pin
      • PEEK Insulators + SS Squonk Pin
      • Serialised + Anti-strip Allen Key
      • Extra 510 Pin, O-rings & Screws

       

      £ 94.99
    • The Topside SQ is a top filling 21700 mechanical mod designed by Signature Mods and The Vapour Chronicles (TVC). They believed that a reasonably priced, high quality and convenient mechanical squonk mod was important and the Topside SQ reflects that in its exceptional quality and simple to use design.

      Please Note: This is a mechanical device and should only be used by experienced vapers

      Specifications:
      • Solid Silver Contact Points
      • Fine Shot Blasted & Anodised
      • Machined from Solid Billet Aluminium
      • Commercial Grade 3D Printed Internal Sled
      • Silicone Bottle 12.5ml Capacity x 2
      • Spring Loaded Constant Contact 510
      • Magnetic Doors (28 Magnets in total)
      • Serialised Body
      • Size 52.5mm x 91mm x 27mm

      Limited Edition is hand finished and fully assembled in the UK at SQ, HQ

      £ 149.99
    • The standard tank section on the KRMA GEN by Mission XV holds 1ml of E-liquid. This tank extension allows you to increase the capacity to 2ml.

      £ 23.99
    • The KRMA.GEN features a fully adjustable airflow system to suit open airflow to mouth to lung users. KRMA.GEN preserves the minimalistic looks of the KRMA but has a brand new optimized deck.

      Features:
      • Leak resistant design
      • Fully customizable airflow design
      • Large flat head grub screws
      • Ease of build / ability to fit a variety of coil styles
      • Tunnel airflow design
      • Squonk ready design
      • Excellent flavour production
      • Many third party accessories
      • Ability to convert tank to 2ml

      Tank Extension (sold seperately)

      £ 109.99
    • The New SQEVO Squonk Mod by Psyclone Mods is powered by a single 18650 battery (not included) and the 60W Evolv DNA60 board with OLED screen. The body is made from injection moulded black delrin (white delrin future release) with satin stainless steel accents.

      Features:
      • Evolv DNA 60 + OLED Screen
      • 60W Regulated Squonk Mod
      • 7ml Direct Bottle to 510 Connection
      • Delrin Injection Moulded Body
      • Reverse Thread Adjustable 510 (Allen Key Included)
      • Ergonomic Design + Satin Stainless Steel Accents
      • Micro USB Cable for Charging + Firmware Updates
      • Black Delrin
      • Limited Edition White Delrin
      1 x 18650 Squonk Mod
      Dimensions 88mm x 46mm x 27mm

      Spare Bottles (sold separately)

      Rated 4.67 out of 5
      £ 139.99£ 159.99
    • Are you looking for replacement silicone bottles to go in to your Defiant Designs cap system?

      £ 5.99
    • The much awaited GOAT (Greatest of all Time) by Duane (OhmBoy) and Nick (Grimm Green) is available in choice of Black, Blue, Gold, Gunmetal and Stainless Steel colour options.

      The GOAT delivers a consistent, reliable, quality vape every time by utilising a custom designed coil head. Using Anarchist wire in each coil, The GOAT delivers flawless performance with the cleanest wire ever made. Every last detail was expertly crafted to truly make it the “Greatest Of All Time” (GOAT, get it?) We evaluated every possible factor, from fine tuned airflow and conical shape to top cap height and coil elevation. We didn’t stop until we found the sweet spot. No more guessing what coils will perform well, just screw in a GOAT Coil Head, trim the wick, and you are ready to vape.

      Features:
      • 24mm Dripper
      • 304 Stainless Steel Construction
      • Coil Heads Squonkable, No Need To Change Pins To Drip
      • PVD Plated Stainless Steel Top Cap (Black, Blue, Gold & Gunmetal)
      • 1 x 0.13Ω Anarchist 22g Nichrome 80 Dual Coil Head #cloudsbroclouds
      • 1 x 0.19Ω Anarchist 24g Nichrome 80 Dual Coil Head #flavourbanger
      • 810 Drip Tip
      • PEEK Insulators
      • Replacement O-rings

      Replaceable GOAT RDA Coil Heads (click here)

      Dead Goat RDA Kit (click here)

      £ 35.99 £ 19.99
    • Hellvape Rebirth RDA Atomizer is a combination of great work between Youtube reviewer Mike Vapes and Hellvape. It is an intelligent product by Mike’s, and made by Hellvape. Rebirth RDA Atomizer is 2 post build deck with gold plated positive post, and 6mm deep juice well with raised bottom airflow to prevent leaking with 24mm diameter. It is great work.

      Specifications:
      • 24mm diameter
      • 2 post build deck with gold plated positive post
      • 2.5 by 3.5 mm post holes
      • 16 1.2 mm bottom adjustable honeycomb airflow for each side
      • Top cap locking system with adjustable airflow
      • 6mm deep juice well with raised bottom airflow to prevent leaking
      • Flat head screws
      • 810 Cobra drip tip and 810 frosted drip tip included
      • Gold plated squonk pin included
      • With coily tool the correct length to cut coils is 6.5mm

      £ 19.99
    • The Mission XV KRMA RDA boasts a simple, elegant and classy design with minimalistic lines. Engineered with step down, centre oriented airflow and in conjunction with protruding air inlets, not only maximizes flavour output but also makes the KRMA RDA inherently leak resistant. This piece utilises easy to build guides, flat head grub screws and a squonk set screw, to change from dripping to squonking without the need to remove your build or 510 pin.  This beautiful feature packed RDA from Mission XV is sure to impress both seasoned and beginner vapers alike.

      Features:
      • 22mm Outer Diameter
      • Flat Head Grub Screws
      • Leak Resistant Design
      • Step-down Airflow
      • BF Pin
      • PEEK Insulators
      • Base Logo & Serial No

      Contents:
      • BF Ready Atomiser Unit (22mm Diameter, 22mm Height With Drip Tip)
      • 22mm Top Cap (Stainless Steel, Black Delrin) (2 Pieces)
      • 6mm Bore Drip Tip (Black Delrin, Amber Ultem) (2 Pieces)
      • Flat Head Grub Screw Spares (4 Pieces)
      • Spare O-rings (4 Pieces)
      • BF Pin Plug Screw
      • BF Pin Plug Tool

      Rated 5.00 out of 5
      £ 74.99
    • Psyclone is proud to yet again bring you another RDA with features never found in any other rebuildable atomizer. The Citadel’s most interesting feature is its reduced chamber. The way Psyclone designed it’s own chamber reducer is a first in any rebuildable atomizer in the way its installed and the performance it offers.

      The Citadel RDA is a 22mm rebuildable atomizer featuring a uniquely designed dual sided slotted post. The design allows for coils to be installed in any direction with ease. This RDA offers a familiar styled airflow from some of Psyclone RDA’s previous products but with a twist. The Citadel RDA is sure to impress, offering phenomenal flavour and vapour packed into a small package.

      Specifications:
      • 22mm Stainless Steel RDA
      • Peek Insulators
      • Black Delrin Drip Tip
      • Unique Ultem Chamber Reducer To Enhance Flavor and Warmth
      • Dual Sided Slotted Post with Large Flathead Securing Set Screws
      • Hadaly Styled Airflow Angled Downward for Minimizing Leaks
      • Integrated Squonk 510 pin (Plug Screw is Located in the Bottom of the Deck)
      • Spare Parts Kit (Spare O-Rings, Spare Set Screws, Squonk Plug Screw Tool)

      Citadel RDA Caps & Accessories (click here)

      Rated 5.00 out of 5
      £ 75.00
    • Introducing the next chapter in the CSMNT saga, the Layercake. This clamp style RDA only requires the tightening of a single screw to build.  The icing on the cake is CERAMISTEEL, a state of the art insulation technology developed by District F5VE with a higher melting point than most metals and strength that surpasses everything else on the market, this is an RDA built to last.

      Specifications:
      • Size: 24mm
      • Ceramisteel
      • Low Chamber
      • Signature Airflow
      • Squonk Ready
      • Deck O-Ring
      • Internal Sleeve Orings
      • Matching 810 ONETips Base & Black Top
      • Single Post Clamp with Ceramisteel Technology

      Extra Parts:

      1 x post screw
      5 x O-rings
      Beauty Ring: Stainless Steel, Black & Graphite.
      1 x 510 contact

      Colours: Stainless Steel, Black & Graphite

      £ 49.99 £ 9.99
    • Perfect replacements for those old v1 Drip Tech versions dusting away!

      • 4 Magnets installed

      • Ready for conversion with existing Internals and components

      £ 19.99
×
×
×
×

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss