The UK's #1 Advanced Vape Store

flavour

Display:  List Grid

Showing 1–16 of 86 results

    • The CSMNT concept was born from the creative minds of District F5VE and Haus of Zombi, the designer of the first postless deck design – the PI2.  With this new design, we listened to your feedback and implemented changes to bring this device to the next level. The latest iteration focuses on the basics and maintains everything you loved about the original CSMNT while addressing small, but necessary, functionality changes. D5 kept it simple without frills while beefing up some key features. This edition wasn’t about reinventing the wheel, it was about fine-tuning the original design for optimum performance and making even better than before.

      Features:
      • Postless deck
      • Squonk ready
      • Signature blade AFC
      • Top cap heat sink design
      • Compatible with the Layer Cake deck
      • Material: Stainless Steel
      • PEEK Insulator
      • Delrin top tip
      • Colors: SS and Black PVD coating
      £ 49.99
    • Slightly thicker core wire makes these 3mm coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.

      £ 19.99
    • 5 x KA1 0.4 ribbon core wire framed 2 x 27 makes these 4 wrap coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.

       

      2-27/5-0.4/36g   4 wrap 3mm .12Ω dual
      Twisted Messes wire

      £ 19.99
    • Slightly thicker core wire makes these 4 wrap coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.

      £ 19.99
    • The Pal 2 Pro Kit By Artery with its added display screen with adjustable wattage function, plus the amazing HP cores, the Pal 2 Pro will offer you a stunning vape experience for both MTL and DTL vapers.

      Introducing the new Pal 2 Pro Kit By Artery with an added display screen for the adjustable wattage (5-22W), plus the amazing HP cores, the Pal 2 Pro will offer you a stunning vape experience for both MTL and DTL vapers. With its dual memory function which can remember the wattage settings of the HP 1.0ohm and the HP 0.6ohm coils separately when you change between the two. With its easier to fill pod cartridges which has a bigger filling slot to prevent spillage while also being able to support the previous Pal 2 Pods as well, and an easy to replace coil system this pod kit is truly a fine system for any user.

      Features:
      • Size: 43x19x83mm
      • Material: Aluminum 6063
      • Output Wattage: 5-22W
      • Battery Capacity: 1000mAh
      • E-juice Capacity: 2ml

      £ 31.99
    • The Artery PAL II Coil is specially designed for the Artery PAL 2 Pod Starter Kit and Artery PAL II Replacement Pod. With the two types of Mesh 0.6ohm coil and Regular 1.0ohm, the PAL II Coil will bring you an excellent vaping experience with best flavor and optimal cloud. Just get it for your Artery PAL 2 Kit and PAL II Replacement Pod. 5 pieces each pack. The new updated HP CORES come with 2 different coils: 0.6ohm mesh coil and 1.0ohm regular coil. They are both developed for better flavor and longer life span. Perfectly Compatible with PAL 2 and the other Artery products that will be coming soon.

      Features:
      HP Mesh 0.6ohm(15-23W)
      HP Regular 1.0ohm(9-13.5W)
      Quantity: 1 x 5pcs/pack

      £ 10.99
    • The Vaporesso Gen vape kit is an advanced sub ohm kit, made up of the innovative Vaporesso Gen mod as well as the Vaporesso 2ml SKRR-S vape tank. Powered by dual 18650 batteries (sold separately) with a 220W maximum output, this ergonomic yet durable device boasts a built-in AXON chipset which gives access to multiple output modes including Temperature Control, Power ECO mode and Pulse mode. This device adheres to Vaporesso’s high standards of quality performance with the reliability to match.

      Features:
      • 220W Maximum Output
      • Hard-Wearing, Fire-Resistant Design
      • Button Operated
      • 0.91 Inch OLED Screen
      • AXON Chipset
      • Temperature Control Mode
      • Variable Wattage
      • Curve Mode
      • Pulse Mode
      • Power ECO Mode
      • 2ml E-Liquid Capacity
      • Adjustable Bottom Airflow
      • Top Fill
      • QF Coil Compatible

      Featuring a hard-wearing construction with a rubberised soft finish allowing for a comfortable grip with the protection of flame and scratch resistance. The large firing button serves to activate, lock and unlock the device whilst the three operational buttons navigate the menu system displayed on the 0.91 Inch OLED screen for a simple operation. This can access the series of output modes to accurately specify your ideal vaping preference.

      The Vaporesso SKRR-S tank features a 2ml e-liquid capacity, to refill simply twist off the drip tip to reveal a large juice port and fill with an e-liquid of your choice. A functional triple adjustable bottom airflow gives you full control of your inhale, whether you’re after a loose inhale or a more a restricted draw.

      The Vaporesso QF coils come in two different variants, both using Flex Fiber organic cotton for clear flavour: the 0.2 Ohm QF Meshed coil (Pre-Installed) enabling a large surface area or the 0.15 Ohm QF Strip coil which delivers an even heat for a consistent vape. these coils will perform best with high VG e-liquids of 70% and above.

      £ 59.99
    • The Smok Morph 219, which is the world’s first mod designed with input keyboard, the perfect combination of classic style and modern trend, the Smok 219W Mod has a glossy finish and at the back it is inlaid with exquisite IML resin, the Morph Mod built-in the newest IQ-S chipset, which allow the firing speed low to 0.001S, it powered by dual high-rate 18650 batteries and max output 219watts, vapers can choose the various working modes, it supports the NI, TI, SS heating elements and TCR function under TC mode, vapers also can choose the MyMode working mode, you can set 4 sets of parameters, after finishing the setting, you can save it. the Smoktech Morph adopts the new 1.9Inch touch screen, which is responsive, with the brand new user interface, most of the operations can be finished by a simple touch. there is a big lateral fire key on the left side, much easier to operate than right side ones, there also one small secondary key to lock and unlock the device easily. the Morph Mod with classic push-to-open battery door, allow vapers to install and replace the batteries quickly. vapers can charge the batteries by connecting to a wall adapter or the power bank via the micro USB port, the multiple functions to avoid potential risks, the Smok Box Mod with innovative passcode setting design, which can prevent other people from using the device and protect your pets and children. by the way, the firmware is upgradable. Tank comes with the colorful resin drip tips, which made of healthy material, sleek and beautiful colors, the new Smok Tank with the higher base than the old tanks, which can offer larger room for the airflow, the Smok TF Sub Ohm Tank with convenient top refill design, vapers can inject your favorite e-liquid inside quickly, no leaking worry, there are dual large airflow adjustable slots on the base, you can adjust the air flow freely. two new coil heads available for the new TF tanks, the 0.25ohm BF-Mesh and 0.5ohm Ceramic coil heads, the mesh coils with the large heating area and longer lifespan will produce the best flavor. and the ceramic coil will send you the intense flavor.

      Features:
      • Material: Zinc Alloy + Stainless Steel
      • Colors: Black Red, 7-Color And Black, Gold Black, Prism Blue And Black, Prism Chrome And Black
      • Size: 84.5*44.8*30.2mm
      • Built-in The IQ-S Chipset
      • Powered By Dual High-Rate 18650 Batteries(Sold Separately)
      • Output Power Range: 1-219W(VW)/10-219W(TC)
      • Working Modes: VW, TC-NI, TC-TI, TC-SS, TCR, MyMode
      • Resistance Range: 0.1-2.5ohm(VW)/0.05-2.0ohm(TC)
      • Temperature Control Range: 100-300℃/200-600℉
      • 1.9Inch Colorful Touch Screen + Brand New User Interface
      • 6 Colors Screen Color Setting
      • Password Setting
      • Big Lateral Ergonomically Designed Fire Key
      • Push-To-Open Battery Door
      • Secondary Key To Lock And Unlock
      • Standby Current: <400uA
      • Input Voltage: 6.4V-8.4V
      • Output Voltage: 0.5-8.2V
      • Firming TIme Low TO 0.001S
      • Charging Current: 1.8A
      • Charging Voltage: 5V
      • Micro USB Port For Charging And Firmware Updating
      • Intelligent Atomizer Recognition
      • Puff Monitoring System
      • 10 Seconds Cut-Off
      • Reverse Polarity Protection
      • Over-Heating Protection
      • Low Battery Warning

      £ 65.00
    • The two post system allows for easy builds with two large posts and has very large area for cotton wicking and juice filling. The difference between the V1 and the V1.5 is all compatible caps now sit flush at the bottom of the deck. The deck is made from stainless steel which eliminates corrosion and has brass positive and negative posts for great conductivity.

      This 25mm Deck has a solid copper 510 pin with a stainless steel squonk pin included and extra o-rings.

      Features:
      • 25mm
      • Squonk compatible ( once pin is installed )
      • Solid copper 510
      • Brass positive and negative posts
      • Two post design
      • Stainless Steel deck
      • Deep juice well
      • Engraved carnage logo

      Contents:
      1 x Carnage V1.5 Deck
      Spare 0-rings
      1 x stainless steel squonk pin
      1 x Allen Key

      £ 44.99
    • Purge Ally Pod System by Purge Mods. Ally, is a sub brand of Purge mods.

      This unique pod system comes with a bunch of awesome features. First is the pod latch which encases the pod keeping protected and has a flip mechanism. The Ally has removable door panels so the Ally can be customised to the users desired look, different door panel designs will more readily available in the future.

      The Ally features a proprietary chip, up to 30w of power, which can utilise variable wattage, variable voltage, temperature control, overheating and low battery protection. The ally is geared up for Nic salt’s and freebase nicotine e-liquid so whatever your choice of e-liquid is, the Ally is going to satisfy all your vaping needs.

      Features:
      • Adjustable wattage / voltage / temperature
      • 30w Max power
      • Unique proprietary mesh coils
      • 2ml refill pods (0.8ohm mesh coil )
      • Adjustable airflow for MTL to DTL
      • Compatible with both nic salt and freebase e-liquid
      • Premium zinc-alloy frame with unique designer side panels that are both removable and also customizable
      • Removable mouthpiece
      • Adjustable airflow ring cap
      • 950 mAh Built In LiPo
      • 0.69 inch OLED screen
      • USB port
      • Overheating and low battery protection
      • Removable Doors

      Options:
      • Heat Treated & Carbon Fiber – Neo Chrome Body. Carbon Fiber Doors.
      • Stainless Steel & Resin – Stainless Steel Body. Grey/Black Resin Doors.
      • Suicide King – Black Body. Blood Red Doors. Engraved Top w/ Suicide King Art

      Replacement pods (sold separately)

      £ 69.99 £ 59.99
    • The Ally pods feature a 2ml capacity with a 0.8 mesh coil. Please leave to soak for a short time before use and start off on a low power.

      Contents:
      2 x Ally pods

      £ 9.99
    • The New SQEVO Squonk Mod by Psyclone Mods is powered by a single 18650 battery (not included) and the 60W Evolv DNA60 board with OLED screen. The body is made from injection moulded black delrin (white delrin future release) with satin stainless steel accents.

      Features:
      • Evolv DNA 60 + OLED Screen
      • 60W Regulated Squonk Mod
      • 7ml Direct Bottle to 510 Connection
      • Delrin Injection Moulded Body
      • Reverse Thread Adjustable 510 (Allen Key Included)
      • Ergonomic Design + Satin Stainless Steel Accents
      • Micro USB Cable for Charging + Firmware Updates
      • Black Delrin
      • Limited Edition White Delrin
      1 x 18650 Squonk Mod
      Dimensions 88mm x 46mm x 27mm

      Spare Bottles (sold separately)

      Rated 4.00 out of 5
      £ 159.99
    • The Newest Kennedy 25mm Ruby 21 One Piece Design including constant contact By Kennedy Vapor. The Ruby Mod is renowned for its elegance, simplicity and minimal voltage drop with its one piece design and precision CNC machining.

      Specifications:
      Fits 21700 and 20700
      Fits 18650 With Adapter (sold separately)
      Constant Contact Switch Included
      Completely Rebuildable
      Lifetime Warranty
      Smoother Airflow
      26mm Outer Diameter
      25mm Build Deck
      Bottom Airflow
      Easy to Clean Redesigned Super Smooth Constant Contact Switch (no tools required); virtually eliminates arc marks on your batteries
      Extremely Low Voltage Drop Due to One Piece Design

      Available in SS, Coper, Brass, Gunmetal & Black

      £ 209.99£ 219.99
    • Energy Ice eLiquid by Dr Frost Salt Nic is a vape of all things menthol with the added sprinkle of sugar; creating the tastiest and most energising frozen eliquid that you will ever taste.

      10ml 20mg
      60/40 VG/PG

      £ 4.99
    • Smok Stick V9 Kit is the new kit of Stick V9 series, also the upgraded version of Stick V8 series.
      The Stick V9 comes with a built-in 3000mAh battery and TFV8 Baby V2 tank.

      This kit adopts the Baby V2 S1 Coil and Baby V2 S2 Coil, which are custom-made coils for the Stick series battery, focusing on lower wattage but intense clouds and flavour. Stick V9 series has debuted, and it’s better than ever. Innovation keeps changing the vaping experience!

      Smok Stick V9 Mod Features:

      • 3000mAh Built-In Battery
      • Pen Style Design
      • Durable Alloy Construction
      • Single Button Interface
      • LED Battery Life Indicator
      • Multiple Protection Modes
      • Micro USB Recharge Port

      Smok TFV-Mini V2 Tank Features:

      • 2ml Eliquid Capacity
      • 25mm Diameter
      • Top Fill Swivel Cap Mechanism
      • Adjustable Triple Bottom Airflow
      • Designed for Sub Ohm Vaping
      • Direct To Lung Inhale
      • 0.17 Ohm Single Mesh Coil (Pre-Installed)
      • 0.2 Ohm Dual Mesh Coil
      • Compatible With a Range of High VG Eliquids
      £ 37.99
    • Cucumber eliquid is a fresh and clean tasting blend; on inhale, a mild cucumber flavour develops, bringing with it a floral profile that remains sweet. This is paired with cool menthol notes on exhale, for an icy afterbite.

      Aisu
      , with authenticity and clarity of flavour, recreates that classic Japanese experience, with fresh fruits and cooling ice, bringing you a step closer to the Orient!

      50ml No Nicotine
      (Zap! Nic Salt Included)
      70/30 VG/PG

      £ 13.99
×
×
×
×

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss