OVER A DECADE OF SERVICE (EST. 2013)

Valor MTL RTA By Cthulhu Mods

£ 29.99

Save:14.3%
(1 customer review)
1 review  |  Write a review

Valor MTL RTA By Cthulhu Mods. The aim with the Valor was to achieve the highest and fastest air speed to hit the coil to improve and overall performance and they’ve managed to a phenomenal degree. A wonderfully smooth newly designed airflow system allows for a quieter vaping experience while the domed internal chimney produces exceptional flavour production. The Valor also comes with 6 airflow pins to completely alter your airflow to your required needs. The pins included are 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, and 1.8mm with the ability to use no airflow pin at all for 2.5mm of airflow. Featuring a simple-to-use build deck you will be up and running in no time to behold the wonders of the Valor MTL RTA! Available in both Black and SS and includes both clear and frosted glass sections.

Features:
• Dimensions: 22 x 30mm (excluding the drip tip)
• Constructed from 304 food-grade stainless steel
• Comes with both clear and frosted glass tubes
• New airflow system that ensures smooth and quiet airflow
• The Air Pin Holes are available in sizes 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, and 1.8mm (without the air pin, it measures 2.5mm)
• The kit includes three MTL/RDL Delrin drip tips in Black, Yellow, and White colours

Earn up to 150 points.
Clear
SKU: N/A Categories: , Tags: , ,

Valor MTL RTA By Cthulhu Mods Contents:
1 x Cthulhu Valor MTL RTA
3 x MTL/RDL Delrin Drip Tips (1x Yellow, 1x Black, 1x White)
6 x Airflow Pins (0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, and 1.8mm)
1 x Frosted Glass Tube
4 x Seal Rings (Black, Red, Blue, Yellow)

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 100 g
Colour

,

1 review for Valor MTL RTA By Cthulhu Mods

  1. Sandra Shorland (verified owner)

    nice tank, flavour is really good, build deck is easy to build on , airflow is really good goes from a tight draw mtl to a medium direct lung, so has a fairly wide range .Appears quite well made with a lot of spare parts

Only logged in customers who have purchased this product may leave a review.

You may also like…

×
×
×
×