OVER A DECADE OF SERVICE (EST. 2013)

Tripod2 RTA By Atimizoo

£ 134.99

0 review  |  Write a review

Tripod2 RTA By Atimizoo comes as the successor of the Tripod. It is Atmizone’s fresh suggestion of 22mm outer diameter RTA. The usual CNC high precision parts, bespoke silicon gaskets and high quality materials are always there. Stellar performance, easy top fill, real time access to deck, meet with top notch functional customisation and real time configuration of air flow. Fresh ideas and user feedback have come to further improve the classic Tripod design, to a smaller, more efficient and overall better Tripod2.

Basic Edition Features
• 22mm Outside Diameter SS316F
• Air Flow Tube 4.0mm Dia
• No Air Flow Tube Gives 5.0mm Direct Lung Draw
• 1 x Open (installed) + 1 x Restricted Chimney
• 2ml Quartz Glass Tank + 3.4ml Extension Kit Option
• 1 x Narrow + 1 x Wide Acetal 510 Drip Tips
• Food Grade O-Rings & Gaskets
• M2.5mm Pan Head Phillips Post Screws & PEEK Insulators
• Height Without 510 & Drip Tip – 37mm
• Weight Without Tip 50g
• User Manual + Warranty Card
• Phillips Screwdriver Tool + Spares

Deluxe Edition Features
• Everything In The Basic Edition Plus:
• Air Flow Tubes: 2.0mm, 2.5mm, 3.0mm, 3.5mm Dia
• Air Flow Pins: 0.8mm, 1mm, 1.2mm, 1.5mm, 1.8mm Dia

Tripod2 Extension Kit (click here)

Earn up to 675 points.
Clear
SKU: N/A Categories: , Tags: , , ,

Tripod2 RTA By Atimizoo

Please Note: This atomizer has been lubricated by Atimizoo with VG due to the 37 parts it has, this avoids any potential surface rust due to any long term storage.

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable atomizers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 200 g
Colour

, , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • The SnailTank is an alternative to the Billet Box Boro Tank rev4.It consists of two main parts, a tank section and an adapter (base), plus some custom silicon gaskets. The tank is cross compatible with the VapeSnail tank, while the adapter (base) essentially takes the place of the VapeSnail deck to create a hosting base for the Boro bridges. The Tank section and adapter together create a form with an outer shape which is almost identical with the classic Boro tank.

    The SnailTank can be refilled through a large refill hole placed at the front upper side. It allows access to the RBA deck even when almost full with juice, any time, in the case of VapeShell and all bridges with a similar collaboration between chimney and deck (non-threaded, not extra tight via o-ring intervention between the two parts). Last but not least, it features a Chimney Gasket, which is added on the top side of the tank section to adjust the hole to the diameter of Boro standard bridge chimneys and offer some extra advantages. Among other things, it seals with the AIO 510 nut, even if you remove the sealing o-ring that most nuts or hybrid drip tips have. This eliminates the usual pain when the chimney of the bridge is automatically lifted up while unscrewing the nut/hybrid drip tip, and the bad sealing that most hybrid drip tips present, either because of normal tear and wear, or due to bad choice of o-rings. It is advised to remove the hybrid drip tip o-ring or the 510 nut o-ring to enjoy the best from the SnailTank.

    £ 27.99
    Earn up to 140 points.Select options
  • VapeSnail By Atimizoo is a new rebuildable atomiser concept for Billet Box and Boro compatible AIO’s. With its amazing potential, real time access to deck, real time fixed air flow swap ability, easy refill system, easy rebuilding and complete package overall, the VapeSnail is more than just another rebuildable bridge, introducing a unique RTA experience to the users of Billet Box and Boro compatible AIO’s.

    Features:
    • PCTG Tank Allows Real Time Deck Access
    • Air Flow Tuning Via 5 Fixed AFC Tubes
    • 2mm, 2.5mm, 3mm, 3.5mm Hole Dia AFC Tubes
    • No Air Flow Tuning Tube Dia 4mm Used With Pins
    • 1mm, 1.2mm, 1.5mm, 1.8mm Dia Air Flow Tuning Pins
    • 5.2mm – 6mm Maximum Coil Height In Chamber
    • 2.5mm Pan Head Phillips Post Screws
    • SS316F & PEEK Insulators

    £ 127.99
    Earn up to 640 points.Select options
  • Dotshell By Atimizoo is a dedicated RBA for the dotAIO by Dotmod. Based on the VapeShell, yet taking quite some steps forward, the DotShell introduces all features of RBAs to the world of AIO devices. The DotShell utilises the top part of dotAIO’s stock reservoir and incorporates an adaptation of dotAIO RBA’s AFC system, with real time access to further customise the air flow under the coil.

    The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience with no need of AFC Ring adjustment.

    Features:
    • Air Flow Tuning Via AFC Ring + Pos. Tube
    • Spare Pos. Tube Airflow 0-2mm Dia
    • Stock Pos. Tube Airflow 0-3.8mm Dia
    • 4.2mm Maximum Coil Height In Chamber
    • 2.5mm Pan Head Phillips Post Screws
    • SS316F & PEEK Insulators

    £ 74.99£ 79.99
    Earn up to 400 points.Select options
  • Tripod2 Extension Kit By Atimizoo includes:

    -One Tank Extended, made of  Borosilicate Glass with fused ends.

    -One Nut Extended with inner D=3.5mm (SS316F)

    -One Nut Extended with inner D=5.0mm (SS316F)

    -One Extension Tube (SS316F)

    The kit increases height of device by only 6mm, to a total of 42.20mm Tripod2 extended version.
    Available in natural SS.

    £ 27.99
    Purchase & earn 140 points!Add to basket
×
×
×
×