Swerve Mod By Purge Mods
0 review | Write a review
The button housing is comprised of 3 very strong magnets which ensure a comfortable throw and one hell of a hit and one beefy copper contact pin. The threading on each mod is flawless and they are weighty too, these mods ooze high-end quality. This mod comes with a rugged, hard shell carry case.
• 29mm body
• to 28.5mm on top
• Fully adjustable button to compensate for battery rattle
• Deep CNC engravings
• 3 Magnet button
• Hybrid top
• Locally made in Orlando U.S.A
Carnage RDA (sold separately)
Skull Cap (sold separately)
1 x Swerve mod
1 x 18650 Battery adaptor
1 x Hard shell carry case
1 x Certificate of authenticity
This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of devices.
Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.
Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.
Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.
Only logged in customers who have purchased this product may leave a review.
You may also like…
The Carnage RDA has proven to be one of the most popular RDA’s in the vape community and Purge have revisited it’s predecessor with the V1.5 Carnage RDA.
The two post system allows for easy builds with two large posts and has very large area for cotton wicking and juice filling. The difference between the V1 and the V1.5 is all compatible caps now sit flush at the bottom of the deck. The deck is made from stainless steel which eliminates corrosion and has brass positive and negative posts for great conductivity.
This 25mm RDA has a solid copper 510 pin with a stainless steel squonk pin included and extra o-rings.
• Fixed airflow ( Ultem cap only )
• Adjustable Airflow
• Squonk compatible ( once pin is installed )
• Solid copper 510
• Brass positive and negative posts
• Two post design
• Stainless Steel deck
• Deep juice well
• Engraved carnage logo
Jazz up your Carnage deck with these Purge Mods Skull caps. These 28mm caps are designed to fit onto the Carnage deck ( V1 and V1.5 )
Choose from Copper, Brass or Black (Copper Cerekote)
(Deck not included )
1 x Skull Cap
1 x 810 widebore drip tip
£ 79.99 – £ 84.99
The Money Shot RDA by Purge Mods is designed to fit perfectly onto the Purge Mods Slam Piece.
This RDA has an over diametre of 30mm, perfect for the Slam Piece, internal walling of 3mm and fixed airflow for a very flavoursome vape. The two post system allows for easy builds with 2 large posts.
• Ultem drip tip (compatible with Purge / Kennedy / Goon / Comp lyfe drip tips )
• Solid copper 510
• Brass Deck w/ Brass, Ultem or Black Cap
• Deeper juice well
• Engraved Moneyshot logo
1 x Moneyshot RDA
1 x Allen Key