SteamShell RBA By Atimizoo

£ 84.99£ 91.99

0 review  |  Write a review

SteamShell RBA By Atimizoo is the successor to the VapeShell RBA. With an improved deck it has cut outs on outer rim for easier rebuilding and better wicking. It is connected with the upper chimney body with a sleeve-type collaboration, to allow real time access to deck when needed. The airflow is regulated right under the coil, through fixed air flow tubes with the ability to swap the air flow tubes at any time while keeping the build and the liquid inside the tank intact. Eleven air flow options in total and 2 different chimney tubes cater for any vaping style.

Basic Edition Features:
• Stainless Steel Satin Finish
• 4.0mm Air Flow Tube Pre-Installed
• M2.5mm Phillips Post Screws & PEEK Insulators
• Open Chimney Tube + Restricted Chimney Tube
• 5.0mm Direct Lung Use Air Flow Pole Pushed Inside Deck Nut
• 510 Aux Building Base
• Spare Post Screws + O-Rings
• User Manual + Warranty Card
Deluxe Edition Features:
• Everything In The Basic Edition Plus:
• Air Flow Tubes: 2.0mm, 2.5mm, 3.0mm, 3.5mm Dia
• Air Flow Pins: 0.8mm, 1mm, 1.2mm, 1.5mm, 1.8mm Dia
Earn up to 460 points.
SKU: N/A Categories: , Tags: , , ,

SteamShell RBA By Atimizoo

Please Note: This atomizer has been lubricated by Atimizoo with VG due to the parts it has, this avoids any potential surface rust due to any long term storage.

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable atomizers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 110 g

, , , , ,


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…