The UK's #1 Advanced Vape Store

Stacked Piece By Purge Mods

£ 310.00£ 330.00

0 review  |  Write a review

The Stacked Piece by Purge Mods is one heavy hitting mod. Seriously! And double the power this time round with it’s series, stacked design. The mod features constant contact button that will have you chucking clouds for days on end. The Stacked Piece is a side firing mod and is 30mm in diameter and has a fire button which is made of ultem, fixed onto the body of the mod. The battery sit’s in a copper cup which is then housed in a black ultem cup and has a turnable switch to lock or unlock. It can accommodate 21700 / 20700 batteries only.

The threading on the mod is flawless and is weighty too, this mod oozes high end quality. This mod comes with a rugged, hard shell carry case.

Features:
• 30mm diameter
• 153mm height
• Constant contact
• Unique side firing button
• Button locking mechanism
• Hybrid design
• Serialized
• Copper cup for excellent conductivity
• 21700 / 20700 compatible ( batteries not included )
• 18650 Ultem sleeve and copper cup
• Vent holes
• Stacked piece engravings
• Locally made in Orlando U.S.A

Contents:
1 x Stacked Piece mod
1 x Hard shell carry case
1 x Certificate of authenticity

Clear

Note: Authenticity Card can be found under the foam inside the box top lid.

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of devices.

Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defective upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizersb and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Colour

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • The Money Shot RDA by Purge Mods is designed to fit perfectly onto the Purge Mods Slam Piece.

    This RDA has an over diametre of 30mm, perfect for the Slam Piece, internal walling of 3mm and fixed airflow for a very flavoursome vape. The two post system allows for easy builds with 2 large posts.

    Specifications:
    • 30mm
    • Ultem drip tip ( compatible with Purge / Kennedy / Goon / Comp lyfe drip tips )
    • Solid copper 510
    • Brass
    • Deeper juice well
    • Engraved Moneyshot logo

    Contents:
    1 x Moneyshot RDA
    Spare 0-rings
    1 x Allen Key

    £ 79.99
  • The Slam Piece by Purge Mods is one heavy hitting mod. Seriously! A palm size, constant contact device that will have you chucking clouds for days on end. The Slam Piece is a side firing mod and is 30mm in diameter and has a fire button is made of ultem, fixed onto the body of the mod. The battery sit’s in a copper cup which is then housed in a black ultem cup and has a turnable switch to lock or unlock. It can accommodate 21700/20700/20650 and 18650 batteries. (Batch 2)

    The threading on the mod is flawless and is weighty too, this mod oozes high end quality. This mod comes with a rugged, hard shell carry case. Perfectly matched with Money Shot RDA (sold separately) Available: Brass / Brass (Tunsgten Splatter) / Copper (Black Cerekote)

    Specifications:
    • 30mm diameter
    • 85mm height
    • Constant contact
    • Unique side firing button
    • Button locking mechanism
    • Hybrid design
    • Serialized
    • Copper cup for excellent conductivity
    • 21700/20700/20650/18650 compatible (batteries not included)
    • 18650 Ultem sleeve and copper cup
    • Vent holes
    • Slam piece engravings
    • Locally made in Orlando U.S.A

    Contents:
    1 x Slam Piece mod
    1 x 18650 Ultem sleeve and copper cup
    1 x Hard shell carry case
    1 x Certificate of authenticity

    £ 279.99
  • The Enforcer by Purge Mods is a real looker, heavy hitting piece of hardware. The mod is wider than previous designs, 29mm diameter and tapers to 28mm at the top which ensures for a minimum voltage drop and maximum output and features some exquisite CNC machine work and knurling on the grip area. Designed for 21700/20700/18650 batteries.

    The Enforcer also comes with a cap, which is only designed for the Carnage RDA and features an ultem drip tip and dual cyclops airflow.

    The button housing is comprised of 3 very strong magnets which ensure a comfortable throw and one hell of a hit, one beefy copper contact pin and has a ultem throw button, which can be customised with other designs in the future.

    The Enforcer oozes high end quality and comes with a rugged, hard shell carry case.

    Features:
    • 29mm body
    • Tapers to 28mm on top
    • Carnage RDA slam cap with ultem drip tip
    • Fully adjustable button to compensate for battery rattle
    • Ultem throw button
    • 21700 / 20700 / 18650 Compatible
    • Deep CNC engravings
    • Serialized
    • Hybrid top
    • Made in Orlando U.S.A

    £ 299.99£ 324.99
×
×
×
×

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss