The UK's #1 Advanced Vape Store

Spot RBA By EVL Vapors

£ 98.99£ 99.99

0 review  |  Write a review

The Spot RBA was designed to replace the tank of your DotAIO and incorporating a Reaper styled deck to provide fantastic flavour. It has a tight fit and a direct air path designed to keep condensation to a minimum. Filling is simple and must be filled holding the device upside down. This allows for maximum filling with no chance of flooding/over saturating the coil. (Filling the device on its side will cause a mess)

Features:
• 316 Stainless Steel
• PEEK Insulators
• Polycarbonate or Amber Ultem Tank
• Airflow Insert Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
• EVL Tin Including Muji Organic Cotton
• Spares Pack: All O-rings + Two Spare Post Screws

The Spot was designed for use with original DotAIO parts and we are therefore unable to guarantee the fitting of third party parts. Fitting of third party parts is done at your own risk.

Clear
SKU: N/A Categories: , Tags: , , ,

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Polycarbonate can crack when used with certain e-liquid, so please be sure that it is suitable for use with polycarbonate.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 100 g
Colour

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • The DotShell is a dedicated RBA for the dotAIO by Dotmod. Based on the VapeShell, yet taking quite some steps forward, the DotShell introduces all features of RBAs to the world of AIO devices. The DotShell utilises the top part of dotAIO’s stock reservoir and incorporates an adaptation of dotAIO RBA’s AFC system, with real time access to further customise the air flow under the coil.

    The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience with no need of AFC Ring adjustment.

    Features:
    • Air Flow Tuning Via AFC Ring + Pos. Tube
    • Spare Pos. Tube Airflow 0-2mm Dia
    • Stock Pos. Tube Airflow 0-3.8mm Dia
    • 4.2mm Maximum Coil Height In Chamber
    • 2.5mm Pan Head Phillips Post Screws
    • SS316F & PEEK Insulators

    £ 71.99£ 76.99
  • The DotAIO Mini is the newest all in one device to come from Dotmod, as to be expecting attention to detail hasnt been missed, a smooth and faultless design very much like the orignal DotAIO but now smaller.

    Powered by a single 18350 battery (Not Supplied) this small little device still offers the same power settings as the orginal and is also cross compatible with all existing RBA’s and tanks, the major chahttps://www.custom-vapes.co.uk/product/efest-10-5a-18350-700mah-flat-top/nge other than it size is the all new side airflow intakes which will allow for increased and a smoother airflow, coming with the DotAIO Mini is the new version of 0.7ohm coil.

    The DotAIO mini also features dry burn protection that cuts the current when the e-juice level is low which in turn extends the life of your coils, with the DotAIO’s easy to remove 2ml tank, changing coils has never been easier. The ergonomic spring-loaded contact located under the tank section allows for easy tank removal, offering 4 power output settings based on the coil resistance (Very Soft, Soft, Medium, Strong) which is designed to fulfill your preferences and deliver the best performance possible from an AIO.

    £ 59.99
  • The DotMISSION RBA for the DotAIO features beautiful sleek lines and unique two-tone shades. Meticulously designed for the ultimate experience between form and purpose that’s out of this world.

    The DotAIO just got even better.

    Features:
    Blackout Edition

    • DotAIO Stainless Button
    • Black Anodised Chimney
    • Extended Juice Capacity
    • Supports Up To 3mm Coils
    • Wire Relief Cutouts & Seating
    • Airflow Reducers 1.0mm, 1.5mm, 2.5mm, 3.5mm

    Standard Edition
    • Extended Juice Capacity
    • Easy Build Two Post Deck
    • Supports Up To 3mm Coils
    • Wire Relief Cutouts & Seating
    • Airflow Reducers 1.2mm, 2.1mm, 3.5mm

    £ 104.99£ 114.99
×
×
×
×