The UK's #1 Advanced Vape Store

Slam Piece B4 Knurled By Purge Mods

£ 299.99£ 349.99

0 review  |  Write a review

The Slam Piece B4 by Purge Mods is one heavy hitting mod. Seriously! A palm size, constant contact device that will have you chucking clouds for days on end.

The Slam Piece is a side firing mod and is 30mm in diameter and has a fire button is made of ultem, fixed onto the body of the mod. The battery sit’s in a copper cup which is then housed in a black ultem cup and has a turnable switch to lock or unlock. It can accommodate 21700/20700/20650 and 18650 batteries.

The threading on the mod is flawless and is weighty too, this mod oozes high end quality. This mod comes with a rugged, hard shell carry case.

** BATCH 4 **

Mod Features:
• 30mm diameter
• 85mm height
• Constant contact
• Black cerakoted copper body with Knurling
• Unique side firing button
• Button locking mechanism
• Hybrid design
• Serialized
• Copper cup for excellent conductivity
• 21700/20700/20650/18650 compatible ( batteries not included )
• 18650 Delrin sleeve
• Vent holes
• Slam piece engravings
• Locally made in Orlando U.S.A

Cap Features:
• Fits the carnage RDA
• 30mm diametre
• 510 Wide bore drip tip
• Copper cerakoted with knurling

Clear
SKU: N/A Categories: , Tags: , , , ,

Slam Piece B4 Setup Contents:
1 x Slam Piece mod
1 x 18650 Delrin sleeve and copper cup
1 x Hard shell carry case
1 x Money shot cap
1 x Certificate of authenticity

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of devices.

Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Combination

Mod & Cap Set, Mod Only

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • The Viper Mod by Purge Mods is a competition winning mod and can accommodate 21700 / 20700 / 18650 batteries. The Viper Mod features some fantastic CNC machining.

    The button housing is comprised of 3 very strong magnets which ensure a comfortable throw and one hell of a hit and one beefy copper contact pin. The threading on each mod is flawless and they are weighty too, these mods ooze high-end quality. This mod comes with a rugged, hard shell carry case.

    Features:
    • 29mm body
    • Tapers to 28.5mm on top
    • Fully adjustable button to compensate for battery rattle
    • Unique CNC engravings
    • Hybrid top
    • Locally made in Orlando U.S.A

    Contents:
    1 x Viper mod
    1 x Hard shell carry case
    1 x Certificate of authenticity

    Match your Viper mod with Viper Caps designed to fit on all Carnage RDA By Purge Mods.

    £ 249.99£ 259.99
  • The Iconic Purge deck has been redesigned as the Carnage RDA. The two post system allows for easy builds with the  signature clamp and 3 flat head screws. The cap has a new design which now features an adjustable airflow.

    This 25mm RDA has a solid copper 510 pin with a silver plated squonk pin included and extra o-rings.

    Features:
    • 25mm
    • Adjustable airflow
    • Squonk compatible (once pin is installed )
    • Ultem 810 drip tip (compatible w Purge/Kennedy/Goon)
    • Solid copper 510
    • Deeper juice well
    • Engraved carnage logo

    Ultem Cap Upgrade (click here)

    NOW ONLY WITH V2 2 POST KIT

    £ 69.99
  • The Money Shot RDA by Purge Mods is designed to fit perfectly onto the Purge Mods Slam Piece.

    This RDA has an over diametre of 30mm, perfect for the Slam Piece, internal walling of 3mm and fixed airflow for a very flavoursome vape. The two post system allows for easy builds with 2 large posts.

    Specifications:
    • 30mm
    • Ultem drip tip (compatible with Purge / Kennedy / Goon / Comp lyfe drip tips )
    • Solid copper 510
    • Brass Deck w/ Brass, Ultem or Black Cap
    • Deeper juice well
    • Engraved Moneyshot logo

    Contents:
    1 x Moneyshot RDA
    Spare 0-rings
    1 x Allen Key

    Rated 5.00 out of 5
    £ 79.99£ 84.99
×
×
×
×

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss