A Collaboration between Mass Mods and Augvape teamed up to bring you the best possible squonking experience you can buy for under £40. The power you’ve come to expect from any Mass Mods device, without breaking the bank. A single 18650 powered, stripped down version of the CS1, with MOSFET protection and gold plated contacts. 8.5ml silicone bottle included.
The smooth design and well placed firing button give the mod a familiar feel in the hand, and thanks to the mosfet protection and gold plated contacts, it will give a powerful hit on your favourite BF RDA.
Features: • Detachable door • 8ml soft silicone bottle • Powered by 1x 18650 (Not Included) • Plastic body and anodized aluminum doors • Gold Plated Contacts • Mosfet Protection
This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of devices or rebuildable atomizers.
Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.
Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.
Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.
Only logged in customers who have purchased this product may leave a review.
Introducing the CS1 Squonk Mod, like no other the CS1 has special button features engineered to work with safety in mind. The sensor relies on the electrical properties of the human body to detect when the button is being touched by you, and not the things you carry in your pocket. Be at ease knowing your mod will work only where it needs to – in your hands.
Specifications: • Low resistance PCB mounted MOSFET • 8ml soft silicone bottle • Single 18650 battery power source (not included) • Recommended coil resistance of .2 ohm • Capacitive Safety – The sensor relies on the electrical properties of the human body to detect when the button is being touched and/or pressed • Coloured LED battery indicator – Four color states to quickly and easily determine remaining charge of the batteries • Alumide body and anodised aluminium doors for optimal wear protection. • Three position master switch – With a flick of a switch, you can bypass the capacitive function or turn the mod off completely • Silicon wires – All wires in the CS1 are silicon-sheathed and meant for high current applications. These wires are super flexible, strong, and are rated for temperatures up to 200°C • Mitec switch – Flat, durable, stainless steel anti-vandalism button with IP54 protection classification and rated for 100,000 on/off cycles
Designed by AmbitionZ VapeR and Hellvape the Aequitas RDA adopts innovative upside down barrel for 2 optional airflow. The four-post build deck makes building easy and fast.
Features: • 24 mm diameter • Gold plated postless raised style deck • 2.5mm square post holes to handle any build you throw at it • 9mm by 2mm airflow slots • 2 options for airflow, top and bottom. Flip barrel upside down to make your choice • Flat head and allen key screws included • 810 resin drip tip,810 derlin drip tip & 510 stainless steel adapter included • Gold plated squonk pin included • Line up protruding lock on deck with opposite on barrel to properly align barrel to deck