Layercake RDA By District F5ve
0 review | Write a review
Introducing the next chapter in the CSMNT saga, the Layercake. This clamp style RDA only requires the tightening of a single screw to build. The icing on the cake is CERAMISTEEL, a state of the art insulation technology developed by District F5VE with a higher melting point than most metals and strength that surpasses everything else on the market, this is an RDA built to last.
• Size: 24mm
• Low Chamber
• Signature Airflow
• Squonk Ready
• Deck O-Ring
• Internal Sleeve Orings
• Matching 810 ONETips Base & Black Top
• Single Post Clamp with Ceramisteel Technology
1 x post screw
5 x O-rings
Beauty Ring: Stainless Steel, Black & Graphite.
1 x 510 contact
Colours: Stainless Steel, Black & Graphite
This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable atomizers.
Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.
Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.
Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.
Only logged in customers who have purchased this product may leave a review.
You may also like…
The CSMNT 24k Postless RDA By District F5ve boasts a spacious, unobstructed, and low chamber design which has capabilities for large and condense flavour builds. Using the sleeve as the deep juice well your likely to never go dry!
• Size: 24mm
• Matte Black, SS & PRZM
• Delrin & Ultem Tips
• 4mm lead inserts
• 24K Gold plated deck
• 24k Gold plated copper pin
Standard Size Colours: Stainless Steel, Black, Solar Flare (Orange), Proxima Centuri (Red), Rocket Bunny (Purple), Star Road (Graphite), Military Satellite (Green), Orion’s Belt (Blue), UGC 1810 (Rose Gold), Gold Mirror (Gold)
Batch 3: Black Delrin Drip Tip, 4 sets of short/long grub screws (16) 5 x spare O-rings. Includes Ultem La Patite Balle Drip Tip
Introducing the CS1 Squonk Mod, like no other the CS1 has special button features engineered to work with safety in mind. The sensor relies on the electrical properties of the human body to detect when the button is being touched by you, and not the things you carry in your pocket. Be at ease knowing your mod will work only where it needs to – in your hands.
• Low resistance PCB mounted MOSFET
• 8ml soft silicone bottle
• Single 18650 battery power source (not included)
• Recommended coil resistance of .2 ohm
• Capacitive Safety – The sensor relies on the electrical properties of the human body to detect when the button is being touched and/or pressed
• Coloured LED battery indicator – Four color states to quickly and easily determine remaining charge of the batteries
• Alumide body and anodised aluminium doors for optimal wear protection.
• Three position master switch – With a flick of a switch, you can bypass the capacitive function or turn the mod off completely
• Silicon wires – All wires in the CS1 are silicon-sheathed and meant for high current applications. These wires are super flexible, strong, and are rated
for temperatures up to 200°C
• Mitec switch – Flat, durable, stainless steel anti-vandalism button with IP54 protection classification and rated for 100,000 on/off cycles
Cheaper Version S2 Squonk Mod (click here)
£ 220.00 £ 19.99
The ONE Tips are wide bored, custom handcrafted resin pieces specially formulated by D5. We wanted the ONE Tips to be the one tip that you’ve been searching your whole vape life for.
Made to fit any RDA that takes a 810 ( Goon / Kennedy ) sized drip tip. The ONE Tip is interchangeable with three different finishes for the base in SS or Gold. Top of the tip comes in 6 different color options:
• Black Marble
• Blue Swirl
• Cosmic Purps
• Gold Flake