KB2 RBA By Mission XV

£ 109.99

0 review  |  Write a review

KB2 RBA By Mission XV has been engineered to fit a Boro Tank or DotTank and comes with 7 different Airflow options. The KB2 Nut helps secure your KB2, reduces connectivity problems, and allows you to swap airflow options on the fly.

Note: You need the KB2 RBA DotBoro Conversion Kit to use the KB2 RBA in a DotAIO Device.

• Body High Polished Stainless Steel
• Flat Head Grub Screws
• Air Flow Options: 1mm, 1.2mm, 2mm, 2.5mm, 3mm, 3.5mm, 4.3mm
• Spare Flat Head Grub Screws + O-Rings
• PEEK Insulators

Only 2 left in stock

Purchase & earn 550 points!

This product is for advanced users only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 100 g


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • KB2 RBA DotBoro Tank By Mission XV is machined from delrin with a borosilicate front glass. Fits DotAIO devices and the KB2 RBA only. It also includes a Mission XV laser engraved stainless steel DotAIO Button.

    £ 44.99
    Earn up to 225 points.Select options
  • Astro Boro Mod By Mission XV has been well over 2 years in the making, and is their passion project. It is a Boro Tank Mod and features the Evolve DNA60 Chipset which is powered by a single 18650 battery.

    It has a single piece aluminium chassis, aluminium accent panels and a magnetically attached aluminium battery door. The rocker switch design that Mission XV is known for uses two independent firing switches that allow the mod to be fired by pressing any part of the rocker switch. Their flush nut is a standard boro thread without an o-ring which prevents inner chimneys being pulled from the bridge when disassembling.

    • Aerospace Aluminium Body, Type 3 Hard Anodised
    • Silver Plated Brass Contacts
    • PEEK Insulators & Replaceable Screws
    • Evolv DNA 60 (int ver) Chipset
    • Custom PCB & Batch Version Boot Screen
    • 540g Operating Force Switch/Fire Button
    • 3-Way Fire Button Upgrade Available
    • Screen Glass Upgrade Available
    • Switch & Screen Plate Upgrade Available
    • Top & Bottom Plate Upgrade Available
    • Single 18650 Battery (not included)
    Boro Tank, Bridge & Tip (not included)
    • Dimensions 87mm x 52mm x 21mm
    • Weight 110g (without battery)

    Please Note: No discount coupons accepted. This version is in black with a gunmetal screen and switch plate, photo attached.

    £ 399.99
    Purchase & earn 2,000 points!Read more
  • KB2 RBA DotBoro Conversion Kit By Mission XV is a conversion kit that lets you use a KB2 RBA in a DotAIO device.

    • Clear Acrylic DotBoro Tank
    • Borosilicate Sliding Front Glass
    • Threaded Chimney + Lower Collar
    • Black Mission XV DotTip (Not for DotAIO V2 Lite)
    • DotBoro Tool + Spare O-rings

    £ 75.00
    Purchase & earn 375 points!Add to basket
  • Cosmos V2 Booster Tip (Integrated) By Mission XV has built-in threading that allows direct integrated connection to the Astro, Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap airflow inserts for a fully customised draw and style. It features an updated base without a bottom o-ring to reduce connectivity and coin slots to tighten the base.

    The included swappable airflow inserts are placed in from the top, and the top part slides over to hold in place. The airflow insert bore diameters are are 4.5mm (without insert), 3mm, 2mm and 1.5mm.

    • Stainless Steel
    • Updated Threading
    • Coin Slots To Tighten Tip
    • Updated Base (no o-ring)
    • Customisable Mid-piece & Tip
    • Integrated Billet Box Threading
    • 3mm, 2mm, 1.5mm Airflow Inserts
    • 4.5mm Bore Without Airflow Inserts

    £ 44.99
    Earn up to 225 points.Select options