OVER A DECADE OF SERVICE (EST. 2013)

KB2 Evo RBA By Mission XV

£ 154.99

0 review  |  Write a review

KB2 Evo RBA By Mission XV has been engineered to fit a Boro tank and utilises the known and loved KB2 deck but integrates a new chamber reducer for easy installation and enhanced wicking and flavour. It comes with 7 different Airflow options and is limited to 250 pieces worldwide.

Features

  • White Pet-P Barrel
  • Matt Stainless Chimney
  • Compatible With All KB2 RBA Accessories
  • KB2 Build Deck & Black PEEK Deck Reducer
  • Spare Flat Head Grub Screws, O-Rings & Tools
  • Stainless Black PVD Coated Top Cap & Lock Nut
  • Air Flow Pins: 1mm, 1.2mm, 2mm, 2.5mm, 3mm, 3.5mm, 4.3mm
  • Swappable Black PEEK Chamber Reducer For Versatile Vaping Styles

Compliments well with the Spacepod Exo

Only 1 left in stock

Purchase & earn 775 points!
SKU: MXV-KB2-EVO-RBA Categories: , Tags: , , ,

This product is for advanced users only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 100 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Astro Boro Mod By Mission XV has been well over 2 years in the making, and is their passion project. It is a Boro Tank Mod and features the Evolve DNA60 Chipset which is powered by a single 18650 battery.

    It has a single piece aluminium chassis, aluminium accent panels and a magnetically attached aluminium battery door. The rocker switch design that Mission XV is known for uses two independent firing switches that allow the mod to be fired by pressing any part of the rocker switch. Their flush nut is a standard boro thread without an o-ring which prevents inner chimneys being pulled from the bridge when disassembling.

    Features:
    • Aerospace Aluminium Body, Type 3 Hard Anodised
    • Silver Plated Brass Contacts
    • PEEK Insulators & Replaceable Screws
    • Evolv DNA 60 (int ver) Chipset
    • Custom PCB & Batch Version Boot Screen
    • 540g Operating Force Switch/Fire Button
    • 3-Way Fire Button Upgrade Available
    • Screen Glass Upgrade Available
    • Switch & Screen Plate Upgrade Available
    • Top & Bottom Plate Upgrade Available
    • Single 18650 Battery (not included)
    Boro Tank, Bridge & Tip (not included)
    • Dimensions 87mm x 52mm x 21mm
    • Weight 110g (without battery)

    Please Note: No discount coupons accepted. This version is in black with a gunmetal screen and switch plate, photo attached.

    Original price was: £ 599.99.Current price is: £ 499.99.
    Purchase & earn 2,500 points!Add to basket
  • Cosmos Smooth Tip (Integrated) By Mission XV: In our inaugural release of Mission Tips, we’ve brought back the beloved Cosmos design, now with a smaller and sleeker refresh and a smooth, gunk free finish. This unique Tip has built-in threading that allows direct integrated connection to the Astro, Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap a bore insert for fully a customised draw and style and a top locking mechanism for a secure fit with an anti-spin sleeve.

    The included airflow insert is placed in from the top, and the sleeve slides over to hold in place. The bore diameter is 4.2mm without the insert and 3mm with the insert. Compatible with the Cosmos Mini and Nuke Mini.

    Features

    • Stainless Steel & Delrin
    • 1 x 3mm Stainless Bore Insert
    • Integrated Billet Box Threading
    • Swappable Sleeve Between Mission Tips & DotMission Tips
    • Top locking mechanism for a secure fit and an anti-spin sleeve
    £ 48.99
    Earn up to 245 points.Select options This product has multiple variants. The options may be chosen on the product page
  • KB2 RBA DotBoro Tank By Mission XV is machined from delrin with a borosilicate front glass. Fits DotAIO devices and the KB2 RBA only. It also includes a Mission XV laser engraved stainless steel DotAIO Button.

    Original price was: £ 44.99.Current price is: £ 34.99.
    Earn up to 175 points.Select options This product has multiple variants. The options may be chosen on the product page
  • Spacepod Exo By Mission XV is a unique design which comprises a composite outer frame with a press fit PCTG inner tank with a custom curved silicone gasket and a borosilicate glass front. It maintains perfect tolerances in the Astro and Cerakoted and Anodised Billet Boxes. It looks hot in dual cut out mods, and adds some extra depth and sleekness in single cut out mods. The frames are manufactured from Black Delrin, Red Acrylic, Smoke Acrylic and White PETP. Anodised aluminium frames will be available in the future.

    Features

    • Borosilicate Front Glass
    • Composite Outer Frame
    • Press Fit PCTG Inner Tank
    • Custom Curved Silicone Gasket
    • Spare Silicone Gasket and O-Rings
    £ 66.99
    Earn up to 335 points.Select options This product has multiple variants. The options may be chosen on the product page
×
×
×
×