OVER A DECADE OF SERVICE (EST. 2013)

Kayfun X MTL RTA By Svoemesto

£ 129.95

0 review  |  Write a review

The original Kayfun was first introduced in 2012 and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Ten years on, and the Kayfun X is the culmination of several design iterations and feature refinements. We are proud to have partnered with SvoeMesto throughout this journey and think this design has ticked a lot of boxes.

The AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector and the build deck can still be accessed with liquid in the tank.

Filling is also made much easier with this design as you simply pull up on the top cap to release the slide locking to reveal the fill port and close the liquid control in one motion. The X engraving on the top cap is an indicator of where to push to slide the cap open for refilling. This can be rotated to your desired position so you can line things up with your mod – especially useful on SBS style devices.

Sometimes the simplest designs are the most effective.

Features:
• Brushed stainless steel finish
• AEROKON air flow control
• Sealed 510 connector
• Air adjustment directly under the coil from 0 – 1.8mm
• Super-short design
• 316L SS construction
• Easy to build deck
• Top filling
• PEEK insulators
• PSU window
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Kayfun X RTA Spare Kit

Only 2 left in stock

Purchase & earn 650 points!
SKU: SVO-KAYX-RTA Categories: , Tags: , , ,

Kayfun X MTL RTA By Svoemesto

Contents:
• Kayfun X with PSU window and matching steel drip tip
• Full spares pack
• User guide

Dimensions:
Diameter: 24mm
Length: 42.5mm (not including 510 thread or tip)

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable atomizers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 150 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that’s shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.

    Features:
    • New – AEROKON air flow control
    • Sealed 510 connector
    • Air adjustment directly under the coil from 0 – 1.8mm
    • Includes the Dome+ tank with steel beauty ring as an extra
    • Includes MTL Figura clear drip tip as an extra
    • Super-short design
    • 316L SS construction
    • Easy to build deck
    • Bottom filling
    • PEEK insulators
    • PSU window
    • 2ml capacity
    • Small chamber size for the best possible flavour
    • Made in Germany
    • Serial number for authentication

    £ 89.95
    Earn up to 450 points.Select options
  • The original Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2020 the [plus] is here with some major improvements. The new AEROKON air flow system is an innovative air flow adjustment that controls the air directly under the coil where it counts. This leads to improved performance with MTL setups, more flavour, optimised vapour saturation and it seals the 510 connector. The new Kayfun Lite [plus] is a diminutive 33mm in height, that’s shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank. SvoeMesto have included some nice extras, the MTL Figura clear tip, and a Dome+ tank with steel engraved beauty ring that sets it apart visually from the original Lite. The Lite [plus] is cross compatible with all accessories for the Kayfun Lite 2019.

    Features:
    • Black DLC Coating
    • New – AEROKON air flow control
    • Sealed 510 connector
    • Air adjustment directly under the coil from 0 – 1.8mm
    • Black DLC matching steel drip tip
    • Includes the Dome+ tank with matching DLC steel beauty ring as an extra
    • Includes MTL Figura clear drip tip as an extra
    • Super-short design
    • 316L SS construction
    • Easy to build deck
    • Bottom filling
    • PEEK insulators
    • PSU window
    • 2ml capacity
    • Small chamber size for the best possible flavour
    • Made in Germany
    • Serial number for authentication

    £ 112.95
    Earn up to 565 points.Select options
  • QP Designs have revived the amazing Fatality RTA. This time it’s a big un. 30mm in diameter, this RTA allows you to use massive coils and create massive clouds at no cost to the flavour. The original was one of the best RTA’s ever made and this is lives up to that expectation. Flavour is incredible and you have full control over your airflow with dual airflow slots to adjust side and bottom airflow.

    Juice flow control is still a feature and allows you to fill your tank without any unnecessary pressure on the cotton to reduce leaking. This big hefty RTA is a seriously great piece of hardware and a must for anyone who loves a larger diameter atty.

    Features:
    ·  30mm Diameter
    ·  Two Slide in metal airflow inserts
    ·  Grooved juice channels on chimney to help wicking
    ·  Juice flow control (Close when filling up)
    ·  Side terminal postless deck
    ·  Multi coil configuration
    ·  Adjustable quad airflow
    ·  Unique airflow Adjustment
    ·  Top airflow ring controls side angled airflow)
    ·  Bottom airflow ring controls centre airflow)
    ·  Clear 810 drip Tip
    ·  Ultem 810 drip tip
    ·  Ultem straight tank 5.5ml
    ·  2ml insert for TPA
    ·  Straight glass 5.5ml
    ·  Bubble Glass 8ml
    ·  Accessory bag
    ·  Fill ring lock/unlock key(Under top cap)

    £ 89.99
    Earn up to 450 points.Select options
  • Spares kit for the Kayfun X. Handy to have in case you lose a part whilst cleaning your Kayfun or if you need to replace a seal.

    Set includes full set of o-rings, 2 x cross head coil post screws.

    £ 3.75
    Purchase & earn 19 points!Add to basket
×
×
×
×