The UK's #1 Advanced Vape Store

Hadaly Titanium Limited Edition By Psyclone Mods

£ 119.99

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)
1 review  |  Write a review

The Hadaly Ti LE by Psyclone Mods (Only 1,500 Produced)

• 22mm Outer Diameter
• Titanium Construction
• Gold Plated Titanium Clamps, Gold Plated SS 510 and Clamp Screws
• Peek Insulators
• Adjustable Airflow Control
• Meticulously engineered to deliver airflow properly to the underside of the coils at 4 different points and angles, with proven Computational Fluid Dynamics
• Innovative Two Post Styled Deck
• Psyclone’s New Coil Clamping System (CCS) for Effortless Coil Installation
• CCS Providing Great Connection for Both Wattage and TC Modes
• Large Flat Head Clamping Screws
• Deep Juice Well with Plenty of Room for Wicking
• Designed for all styles of Vaping
• Black Delrin Drip Tip Included
• Stainless Steel Gold Plated Bottom Feeder 510 Pin Included in Parts Bag

In stock

Width: 3.30 (in)
Height: 2.44 (in)
Depth: 1.29 (in)

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable atomizers.

Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

1 review for Hadaly Titanium Limited Edition By Psyclone Mods

  1. Rated 5 out of 5

    stephenmolnar82 (verified owner)

    Excellent rda, bought for Signature tips SQ. Awesome flavour, very easy build. Expensive but in my opinion worth it
    Great service as usual from Custom Vapes.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Psyclone Mods present the much anticipated Entheon/Hadeon RDA! The legendary modder and creator of the Psyclone Hadaly RDA and many mods has created another masterpiece. The Entheon RDA was born from a labour of love in pursuit of creating the ultimate flavour atty for the second time. In addition to the superior flavour, the Entheon is one of the easiest RDA’s to build on with it’s two post deck and innovative Reversible Coil Clamping System (CCS). Built specifically for single coil builds, the Entheon CCS will allow any novice builder to install their coil with ease. Multiple Tips and adapters are included as standard in different materials as well as a 24.5mm Beauty Ring, and for squonk users a bottom feed pin is included as standard.

    • 22mm Outer Diameter
    • Entheon Cap
    • Hadeon Cap & Plug Kit
    • Designed For Superior Flavour
    • 304 Stainless Steel Construction
    • Dual Adjustable Airflow Into Four Direct Channels
    • Reduced Chamber and Deep Juice Well
    • Bi-Lateral Liquid Injection Block
    • Two Post Deck
    • Reversible Coil Clamping System (CCS)
    • Effortless Coil Installation
    • Slot Head Post Screws
    • PEEK Insulators
    • Base Psyclone Logo

    Entheon/Hadeon RDA
    24.5mm Beauty Ring
    Black Delrin Shorty 510 Drip Tip
    Black Delrin 510 Drip Tip Adapter
    Black Delrin Slim Bore One Piece Drip Tip
    Stainless Steel Shorty 510 Drip Tip
    Stainless Steel 510 Drip Tip Adapter
    Stainless Steel Wide Bore One Piece Drip Tip
    Psyclone Branded Neoprene Storage Bag
    Bottom Feed/Squonk Pin
    Extra Clamp
    Extra Screw
    Extra O-Rings

    Optional Caps, Rings, Tips & Coloured O-rings (click here)

    Rated 5.00 out of 5
    £ 84.99 £ 75.00
  • Psyclone Mods offer a range of accessories for the Entheon RDA.

    • Hadeon SS Cap Kit (Includes 3 Airflow Plugs)
    • Hadeon Clear PCTG Cap Kit (Includes 3 Airflow Plugs)
    • Hadeon Black Delrin Cap Kit  (Includes 3 Airflow Plugs)
    • 3 Piece Wide Bore Drip Tip Kit (Black Delrin, White Delrin, Ultem)
    • 4 Piece Beauty Ring Kit (Black Delrin, White Delrin, Clear PCTG, Ultem)
    • 4 Piece Stubby Cap Kit (Black Delrin, White Delrin, Clear PCTG, Ultem)
    • Full Size Clear Cap with Integral 510 Adapter & Blue, Green, Orange, Purple, Red O-ring Set

    Rated 5.00 out of 5
    £ 16.99£ 29.99
  • The Mission XV KRMA RDA boasts a simple, elegant and classy design with minimalistic lines. Engineered with step down, centre oriented airflow and in conjunction with protruding air inlets, not only maximizes flavour output but also makes the KRMA RDA inherently leak resistant. This piece utilises easy to build guides, flat head grub screws and a squonk set screw, to change from dripping to squonking without the need to remove your build or 510 pin.  This beautiful feature packed RDA from Mission XV is sure to impress both seasoned and beginner vapers alike.

    • 22mm Outer Diameter
    • Flat Head Grub Screws
    • Leak Resistant Design
    • Step-down Airflow
    • BF Pin
    • PEEK Insulators
    • Base Logo & Serial No

    • BF Ready Atomiser Unit (22mm Diameter, 22mm Height With Drip Tip)
    • 22mm Top Cap (Stainless Steel, Black Delrin) (2 Pieces)
    • 6mm Bore Drip Tip (Black Delrin, Amber Ultem) (2 Pieces)
    • Flat Head Grub Screw Spares (4 Pieces)
    • Spare O-rings (4 Pieces)
    • BF Pin Plug Screw
    • BF Pin Plug Tool

    £ 84.99 £ 79.99

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss