The UK's #1 Advanced Vape Store

Goon v1.5 RDA by 528 Custom Vapes

£ 24.99£ 39.99

Rated 4.94 out of 5 based on 17 customer ratings
(17 customer reviews)
17 reviews  |  Write a review

The new Goon v1.5 RDA is an upgrade from the best selling RDA of 2016 the original Goon RDA. The original designers 528 Custom and Blue Eyed Goon have now released the V1.5 so as to improve on the original design. The main differences are: The internal cap is domed vs flat cut, Cyclops airflow which allows better overall adjustment vs the holes, wider and thicker posts with most of the bridge removed to allow strength from bending and spinning, 1.5mm taller screws to allow for more clamping space, thicker upper clamp, no gold plating, hex key, hex and philips/slotted screws, hex bottom feed/squonk pin.

• 24mm
• Larger build space vertically and horizontally than the Goon V1
• Cyclops airflow
• Domed interior top cap for better flavor
• Half inch drip tip
• Wide Bore drip tip
• Standard 510 connection
• Gold plated brass 510 pin
• Stainless steel bridge post
• Stainless steel clamps
• Stainless clamp screws
• Hybrid safe
• Peek insulators
• Positive and Negative bridges are easily replaceable
• Vacuumed Plated Stainless Steel
• Package includes one set of allen key screws, allen key tool, one set of hybrid phillips/flathead screws, stainless steel squonk pin and extra o-rings.


This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable atomizers.

Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight55 g

, , ,

17 reviews for Goon v1.5 RDA by 528 Custom Vapes

  1. Rated 5 out of 5

    Maik Behrendt (verified owner)

    Best Service, best delivery and best RDA ever!
    Thank you Custom Vapes!

  2. Rated 5 out of 5

    ROGER PYM (verified owner)

    Wow well improved over original Goon nice smooth airflow easy and a joy to build on taller posts are great over not dissatisfied the I love this to bits

  3. Rated 4 out of 5

    mark rich (verified owner)

    Overall great improvments over the v1 goon, i just personally think the single coil option is unneeded and it causes airflow problems, that’s my only con so far other then that it’s a great device.

    if you don’t own an original goon or you’re a collector this one is a must buy imo.

  4. Rated 5 out of 5

    Blair Young (verified owner)

    The improvements they made over the original goon are amazing. It has much better flavor than the original due to the improved airflow and conical shape inside of the top cap. The screws are much stronger (don’t strip as easily) and the flat head option allows you to really crank down the clamps. The clamps are also stronger and don’t bend like they did on the original goon.
    My only minor gripe is you can only close the airflow down to about half way. If you go any further it starts to open the single coil airflow slot.

  5. Rated 5 out of 5

    JASON BUDD (verified owner)

    Great RDA. Improved clamps & post screws, Improved Airflow, buttery smooth, looks real nice, top notch machining & tolerances . Only subjective little con is if you cut your AFC down more than 50% in single or dual coil mode, the next AFC cut out will creep in to play as the 3 x AFC cut outs on top cap /sleeve have been cut a fraction to close together! Not a con to me though & 99% of Vapers are not going to cut AFC down more than 50%. Top notch RDA & top notch vendor! Thanks as always Custom Vapes. Spot On, as always.!

Only logged in customers who have purchased this product may leave a review.


Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss