The UK's #1 Advanced Vape Store

DripTech-TS Squonk Mod By 528 Custom Vapes

£ 135.00

0 review  |  Write a review

DripTech-TS By Greg Stephens & 528 Custom Vapes


Specifications:

• Anodized aluminum body and components
• Triple parallel 18650 configuration
• Gold plated copper internals & negative contacts
• Two 10ml capacity bottles
• Complete set of replacement internal and external allen screws and o-rings
• Two SS squonk caps and straw’s
• Two travel inserts and caps for the bottles
• Two spare magnets
• 1.5mm allen driver
• SS key for negative battery contacts
• Optional firmer spring for the fire button
• Built in battery polarity protection

Clear

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of rebuildable devices.

Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Colour

, , , ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Driptech-DS Squonk Mod by Greg Stephens & 528 Custom.
    Specifications:
    • Anodized aluminum body and components
    • Dual parallel 18650 configuration
    • Gold plated copper internals & negative contacts
    • Two 10ml capacity bottles
    • Complete set of replacement internal and external allen screws and o-rings
    • Two SS squonk caps and straw’s
    • Two travel inserts and caps for the bottles
    • Two spare magnets
    • 1.5mm allen driver
    • SS key for negative battery contacts
    • Optional firmer spring for the fire button
    • Built in battery polarity protection
    £ 125.00
  • The new Goon v1.5 RDA is an upgrade from the best selling RDA of 2016 the original Goon RDA. The original designers 528 Custom and Blue Eyed Goon have now released the V1.5 so as to improve on the original design. The main differences are: The internal cap is domed vs flat cut, Cyclops airflow which allows better overall adjustment vs the holes, wider and thicker posts with most of the bridge removed to allow strength from bending and spinning, 1.5mm taller screws to allow for more clamping space, thicker upper clamp, no gold plating, hex key, hex and philips/slotted screws, hex bottom feed/squonk pin.

     

    Specifications:
    • 24mm
    • Larger build space vertically and horizontally than the Goon V1
    • Cyclops airflow
    • Domed interior top cap for better flavor
    • Half inch drip tip
    • Wide Bore drip tip
    • Standard 510 connection
    • Gold plated brass 510 pin
    • Stainless steel bridge post
    • Stainless steel clamps
    • Stainless clamp screws
    • Hybrid safe
    • Peek insulators
    • Positive and Negative bridges are easily replaceable
    • Vacuumed Plated Stainless Steel
    • Package includes one set of allen key screws, allen key tool, one set of hybrid phillips/flathead screws, stainless steel squonk pin and extra o-rings.

    Rated 4.93 out of 5
    £ 59.99 £ 39.99
  • New Metallic Goon 1.5 RDA 24mm Glossy Coloured Caps

    Choose From 4 Colours

    £ 24.99
×
×
×
×

Please Note: Cookies help us deliver the best experience. By using our website, you agree to our use of them. Dismiss