The UK's #1 Advanced Vape Store

Dotshell By Atimizoo

£ 69.99

0 review  |  Write a review

The DotShell is a dedicated RBA for the dotAIO by Dotmod. Based on the VapeShell, yet taking quite some steps forward, the DotShell introduces all features of RBAs to the world of AIO devices. The DotShell utilises the top part of dotAIO’s stock reservoir and incorporates an adaptation of dotAIO RBA’s AFC system, with real time access to further customise the air flow under the coil.

The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience with no need of AFC Ring adjustment.

Features:
• Air Flow Tuning Via AFC Ring + Pos. Tube
• Spare Pos. Tube Airflow 0-2mm Dia
• Stock Pos. Tube Airflow 0-3.8mm Dia
• 4.2mm Maximum Coil Height In Chamber
• 2.5mm Pan Head Phillips Post Screws
• SS316F & PEEK Insulators

In stock

Contents:
1 x DotShell RBA + Reservoir Top
1 x Stock dotAIO 510 Rebuild Base
1 x Pos. Tube Hole Dia 2mm, 2 x Spare Post Screws, 1 x O-ring Kit
1 x User Manual, 1 x Warranty Card

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • DotMod DotAIO SE is a spectacular technology which offers all in one experience. This attractive device is crafted with Zinc Alloy and stainless steel finish. This is for both MTL and DTL vapers. It’s available in black or white color.

    This kit is also compatible with the Nautilus coils which is available in both low and high resistances with all 510 drip-tips, the DotAIO SE is also equipped with an adjustable airflow. The DotAIO automatically sets the power according to the coil set up but also allows you to choose from 4 power levels. It provide protection from dry burn, it cut the current when the e-liquid is low, increasing life of the coil. Operating with a single 18650 battery, the DotAIO SE has an integrated tank.

    There are two types of DotAIO SE coil a 0.3 ohm mesh coil for smooth vapers and a 0.7 ohm ceramic coil. It has Magnetic side doors. Interchangeable DotAIO SE doors are available separately to customize your device.

    Features:
    • 18650 Battery (Sold Separately)
    • 35W maximum output
    • Magnetic side doors
    • MTL or DTL vaping
    • 2ml e liquid capacity
    • Two colour variants

    £ 54.99
  • The VapeShell is Atmizone’s RBA bridge concept for the Billet Box rev4 Boro tank and compatible tank systems. From loose lung hit to MTL, it will suit your vaping habits, with the classic air flow pins and air flow control ring included out of the box.

    The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience, with extra precise adjustment using the AFC ring.

    Features:
    • 2mm, 2.5mm, 3mm, 3.5mm Dia Air Flow Tuning Pins~
    • No Pin Air Flow Dia 4mm. Fine Adjustment With AFC Ring
    • 2 x 2.5mm E-liquid Intake Holes At Base Of Deck
    • 5.5mm Maximum Coil Height In Chamber
    • 2.5mm Pan Head Phillips Post Screws
    • SS316F & PEEK Insulators

     

    £ 64.99
  • The MTL Air Flow Pin Kit reduces the positive tube’s initial 4mm hole diameter down to 1mm, 1.2mm and 1.5mm respectively, offering the ideal air flow for a substantial range of MTL vaping profiles.

    Features:
    • Compatible With DotShell & VapeShell
    • Laser Engraved Hole Diameter On Pins
    • 1mm Hole Diameter Air Flow Tuning Pin
    • 1.2mm Hole Diameter Air Flow Tuning Pin
    • 1.5mm Hole Diameter Air Flow Tuning Pin

     

    £ 10.99
×
×
×
×

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss