The UK's #1 Advanced Vape Store

Diver RBA Boro Tank By Cthulhu Mods

£ 52.99

0 review  |  Write a review

Cthulhu Mods Diver RBA Boro Tank for the Cthulhu AIO Mod & Billet Box mods alike. Two chimneys for different coil building and liquids.

1. Quiet bottom airflow: True MTL configuration, with four air pins: 1.0mm, 1.2mm, 1.4mm, 1.8mm
2. Diver RBA works as an RDTA configuration. The coil is close to the drip tip for a better flavour.
3. Two chimneys for different coil building and liquids.
4. Super dome shape chimney for improved throat hit and superior flavour.
5. Diver RBA is fully compatible with Boro tanks.
6. Threaded 510 connector. No need for any adaptors.

In stock

SKU: CTH-DIV-RBA Categories: , Tags: , ,

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 110 g


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Cthulhu Mods 520 RBA Boro Tank, comes with 4.2ml e-juice capacity and Compatible for all Billet Box styles mods & Cthulhu AIO Mod.

    • 4.2ml e-juice capacity
    • Compatible For All Billet Box Styles Mods
    • Compatible For PnP Coils
    • Compatible For Aspire Nautilus Coils
    • Elegant Design
    • Compact Design
    • Fit For Single DIY Coil Build
    • Easy Coil Building
    Six Airflow Pin & Seven Airflow Styles (0.8mm / 1.0mm / 1.5mm / 2.0mm /2.5mm / 3.5mm & 4.5mm Without Airflow Pin)

    £ 42.99
  • Suede Leather Sleeves for Cthulhu AIO Mod & Billet Box. Suede is a type of leather with a fuzzy, napped finish, commonly used for jackets, shoes, fabrics, purses, furniture, and other items. Suede is made from the underside of the animal skin, which is softer and more pliable than the outer skin layer.

    Size: 13.5cm X 8.7cm
    Contents: 1 x Cthulhu Leather Bag

    £ 17.99
  • The Cthulhu AIO Box Mod Kit is finished with High End Aviation Grade Aluminum (body and panel), and powered with 91% high efficiency ATOM 60W chip. One of the most efficiency small chip on the market. Your battery will last longer.

    The Cthulhu RBA AIO Box Mod Kit is compatible with Billet Box Drip tip adapter and Boro Tanks. The Cthulhu RBA AIO Box Mod Kit comes with 6.0ml tank and air flow inserts: 0.8mm, 1.2mm, 1.6mm, 2mm.

    • VW: 1~60W
    • Powered by 1 x 18650 battery (not included)
    • Fully compatible with Boro Tanks
    • Compatible with Billet Box Drip tip adapter
    • Made Entirely from Aviation Aluminum (Body and panels)
    • The Most Compact smallest 18650 Boro device on the market
    • Lightweight: For a daily use device, designed to reduce weight
    • To save power, the OLED screen can be turned off
    • Fully regulated high efficiency ATOM 60W chip.
    • (VW / VV / TC / TCR / BYPASS)
    • LED light on the fire button to indicate if the device is working
    • Fire button LED light can be turned on or off
    • Comes with MTL RBA and Boro style tank & adapter for Aspire Nautilus coils (coil not included)
    • Air flow inserts: 0.8mm, 1.2mm, 1.6mm, 2mm

    £ 82.99
  • Boxer Classic DNA60 Boro Box Single 2X700 Portable Soldering Station is designed specifically for professional and high-end users. This device is powered by the Evolv DNA60 processor. The Boxer is a small but extremely potent device, designed to provide a balance of both power and convenience.

    Made of nylon plastic, the device is strong but yet light.  The DNA60 is a power regulated digital switch-mode DC-DC converter. It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, OLED Screen, and waterproof onboard buttons.  This version of the Boxer runs from a Single 21700 or 20700 battery, and features battery monitoring.

    • Powered by the Evolv DNA60 chipset
    • Single battery 60W regulated based on 1 x 21700 or 1 x 20700 (sold separately)
    • Accepts Standard Boro/Bridge (sold separately)
    • Output Power 1W – 60W
    • 22 Amp current output limit
    • Output Voltage: 0.2V – 9.0V
    • 200°F-600°F
    • Modes: Locked, Stealth, Power Locked, Resistance Lock, Max Temperature Adjust
    • 8 User Profiles
    • Onboard reverse voltage protection
    • Cell monitoring
    • Plastic Nylon Body
    • Ergonomic design
    • OLED 0.91″ Screen
    • Dimensions: 88mm (H) x 33mm (W) x 46mm (D)

    Accent Packages available for purchase separately (click here)


    £ 349.99