The UK's #1 Advanced Vape Store

Boxer Classic DNA60 Boro Box Mod By Ginger Industries

£ 335.00£ 379.99

0 review  |  Write a review

Boxer Classic DNA60 Boro Box Single 2X700 Portable Soldering Station is designed specifically for professional and high-end users. This device is powered by the Evolv DNA60 processor. The Boxer is a small but extremely potent device, designed to provide a balance of both power and convenience.

Made of nylon plastic, the device is strong but yet light.  The DNA60 is a power regulated digital switch-mode DC-DC converter. It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, OLED Screen, and waterproof onboard buttons.  This version of the Boxer runs from a Single 21700 or 20700 battery, and features battery monitoring.

NOTE:  ALL standard units come WITH colour matching trim. Units shown with optional Accent Package (white/black) have options to include/exclude original panel colour Boro Cover, Screen Plate and Battery Door. 

• Powered by the Evolv DNA60 chipset
• Single battery 60W regulated based on 1 x 21700 or 1 x 20700 (sold separately)
• Accepts Standard Boro/Bridge (sold separately)
• Output Power 1W – 60W
• 22 Amp current output limit
• Output Voltage: 0.2V – 9.0V
• 200°F-600°F
• Modes: Locked, Stealth, Power Locked, Resistance Lock, Max Temperature Adjust
• 8 User Profiles
• Onboard reverse voltage protection
• Cell monitoring
• Plastic Nylon Body
• Ergonomic design
• OLED 0.91″ Screen
• Dimensions: 88mm (H) x 33mm (W) x 46mm (D)

Accent Packages also available separately (click here)


1x Boxer Classic DNA60 Boro Box Single 2X700 Portable Soldering Station
1x Boxer Matching Tip (510 Bridge adapter required for soldering tip. Sold Separately)
1x Boxer Band (Colour Coordinated)
1x Boxer Felt Draw-String Pouch
1x Boxer Tube
1x User Manual

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 250 g

, , , , , , , ,


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Boxer Classic Boro Accent Package. Customise the look of your Boro Box Mod by Boxer with Accent Package.

    Available in colours giving you thousands of possible combinations. Package consists of a boro cover, screen plate and battery door

    NOTE:  Screen Plate requires technical experience to swap.

    £ 44.99
  • A brand new successor to our popular Mission Tips.

    This unique Tip has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap the coloured mid-piece and tip as well as bore inserts for fully customised draw and style. It features an updated base without a bottom o-ring to reduce connectivity issues and lock locators for the base allows you to tighten your tip better with the mid-piece. Alternatively, there are coin slots to further tighten your tip if you wish.

    The included swappable airflow inserts are placed in from the top, and the top part slides over to hold in place. The insert bore diameters are are 4.5mm (without insert), 3mm, 2mm and 1.5mm. Compatible with Cosmos Sleeves by Mission XV

    • Updated Threading
    • Stainless Steel & Delrin
    • Updated Base (no o-ring)
    • 3 x Stainless Bore Inserts
    • Coin Slots To Tighten Tip
    • Customisable Mid-piece & Tip
    • Integrated Billet Box Threading

    £ 44.99
  • Teardrop or Clear front cover / panel fascias to easily view liquid levels.

    £ 22.99
  • Brand: Molicel
    Model: INR 21700 P42A
    Size: 21700
    Chemistry: INR
    Nominal Capacity: 4200mAh
    Nominal Voltage: 3.7V
    Discharge: 30A
    Positive: Flat
    Protected: NO, UNPROTECTED
    Rechargeable: Yes
    Dimensions: 21mm x 70mm

    Includes A FREE Case, Priced Individually.

    £ 8.99