The Back to Basics V4 Setup by Purge Mods is a competition winning mod and can accommodate 21700 / 20700 / 18650 batteries. The B2B Mod series are designed to be as tough as a tank and hit like a truck.
The button housing is comprised of 3 very strong magnets which ensure a comfortable throw and one hell of a hit and one beefy copper contact pin. The threading on each mod is flawless and they are weighty too, these mods ooze high-end quality. This mod comes with a rugged, hard shell carry case.
Features: • 29mm body • Tapers to 28.5mm on top • Fully adjustable button to compensate for battery rattle • Deep CNC engravings • Hybrid top • Stainless Steel Carnage V.15 deck • Skull slam cap ( 28mm ) • Locally made in Orlando U.S.A
Contents 1 x B2B V4 mod 1 x Carnage V1.5 SS 1 x Skull cap 1 x Allen Key 1 x Bag of spares 1 x Squonk pin 1 x Hard shell carry case 1 x Certificate of authenticity
This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of devices.
Note: A rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.
Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.
Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.
Only logged in customers who have purchased this product may leave a review.
The Carnage RDA has proven to be one of the most popular RDA’s in the vape community and Purge have revisited it’s predecessor with the V1.5 Carnage RDA.
The two post system allows for easy builds with two large posts and has very large area for cotton wicking and juice filling. The difference between the V1 and the V1.5 is all compatible caps now sit flush at the bottom of the deck. The deck is made from stainless steel which eliminates corrosion and has brass positive and negative posts for great conductivity.
This 25mm RDA has a solid copper 510 pin with a stainless steel squonk pin included and extra o-rings.
Features: • 25mm • Fixed airflow ( Ultem cap only ) • Adjustable Airflow • Squonk compatible ( once pin is installed ) • Solid copper 510 • Brass positive and negative posts • Two post design • Stainless Steel deck • Deep juice well • Engraved carnage logo
The Slam Piece B4 by Purge Mods is one heavy hitting mod. Seriously! A palm size, constant contact device that will have you chucking clouds for days on end.
The Slam Piece is a side firing mod and is 30mm in diameter and has a fire button is made of ultem, fixed onto the body of the mod. The battery sit’s in a copper cup which is then housed in a black ultem cup and has a turnable switch to lock or unlock. It can accommodate 21700/20700/20650 and 18650 batteries.
The threading on the mod is flawless and is weighty too, this mod oozes high end quality. This mod comes with a rugged, hard shell carry case.
** BATCH 4 **
Mod Features: • 30mm diameter • 85mm height • Constant contact • Black cerakoted copper body with Knurling • Unique side firing button • Button locking mechanism • Hybrid design • Serialized • Copper cup for excellent conductivity • 21700/20700/20650/18650 compatible ( batteries not included ) • 18650 Delrin sleeve • Vent holes • Slam piece engravings • Locally made in Orlando U.S.A
Cap Features: • Fits the carnage RDA • 30mm diametre • 510 Wide bore drip tip • Copper cerakoted with knurling