OVER A DECADE OF SERVICE (EST. 2013)

Astro Boro Mod By Mission XV

£ 399.99

Save:33.3%
0 review  |  Write a review

Astro Boro Mod By Mission XV has been well over 2 years in the making, and is their passion project. It is a Boro Tank Mod and features the Evolve DNA60 Chipset which is powered by a single 18650 battery.

It has a single piece aluminium chassis, aluminium accent panels and a magnetically attached aluminium battery door. The rocker switch design that Mission XV is known for uses two independent firing switches that allow the mod to be fired by pressing any part of the rocker switch. Their flush nut is a standard boro thread without an o-ring which prevents inner chimneys being pulled from the bridge when disassembling.

Features:
• Aerospace Aluminium Body, Type 3 Hard Anodised
• Silver Plated Brass Contacts
• PEEK Insulators & Replaceable Screws
• Evolv DNA 60 (int ver) Chipset
• Custom PCB & Batch Version Boot Screen
• 540g Operating Force Switch/Fire Button
• 3-Way Fire Button Upgrade Available
• Screen Glass Upgrade Available
• Switch & Screen Plate Upgrade Available
• Top & Bottom Plate Upgrade Available
• Single 18650 Battery (not included)
Boro Tank, Bridge & Tip (not included)
• Dimensions 87mm x 52mm x 21mm
• Weight 110g (without battery)

Please Note: No discount coupons accepted. This version is in black with a gunmetal screen and switch plate, photo attached.

Out of stock

Join the waitlist to be emailed when this product becomes available

SKU: MXV-AST-MOD Categories: , Tags: , , ,

Astro Boro Mod By Mission XV is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 245 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Orbit RBA By Mission XV features a two-post lead trap design with wire cut outs and flat head screws, and you can remove the deck on the fly without having to remove the tank. The deck design prevents airlocks and provides maximum wicking with its wide channels, combined with side perforated wicking and front and right side (traditional) air inlet locations for all current and future boro devices. You can also completely seal your airflow to 0mm for storage.

    We recommend the MTL kit for experiences from 1.5mm airflow and under.

    Features:
    • Surgical Grade Stainless Steel Deck
    • Adjustable 0.1mm – 4.5mm Airflow
    • 7mm Wide Deck Wicking Channels
    • 6.5mm x 8.55mm Deck Build Space
    • PCTG Smoked Tank + Silicone Fill Bung
    • Aluminium Sprung Airflow Pin + Tool
    • SS version has new media blasted finish

    Choose from SS Media Blasted or Limited Edition Gold.

    £ 179.99£ 189.99
    Earn up to 950 points.Select options
  • The Mission XV KRMA RDA boasts a simple, elegant and classy design with minimalistic lines. Engineered with step down, centre oriented airflow and in conjunction with protruding air inlets, not only maximizes flavour output but also makes the KRMA RDA inherently leak resistant. This piece utilises easy to build guides, flat head grub screws and a squonk set screw, to change from dripping to squonking without the need to remove your build or 510 pin.  This beautiful feature packed RDA from Mission XV is sure to impress both seasoned and beginner vapers alike.

    Features:
    • 22mm Outer Diameter
    • Flat Head Grub Screws
    • Leak Resistant Design
    • Step-down Airflow
    • BF Pin
    • PEEK Insulators
    • Base Logo & Serial No

    Contents:
    • BF Ready Atomiser Unit (22mm Diameter, 22mm Height With Drip Tip)
    • 22mm Top Cap (Stainless Steel, Black Delrin) (2 Pieces)
    • 6mm Bore Drip Tip (Black Delrin, Amber Ultem) (2 Pieces)
    • Flat Head Grub Screw Spares (4 Pieces)
    • Spare O-rings (4 Pieces)
    • BF Pin Plug Screw
    • BF Pin Plug Tool

    £ 79.99
    Purchase & earn 400 points!Read more
  • The SnailTank is an alternative to the Billet Box Boro Tank rev4.It consists of two main parts, a tank section and an adapter (base), plus some custom silicon gaskets. The tank is cross compatible with the VapeSnail tank, while the adapter (base) essentially takes the place of the VapeSnail deck to create a hosting base for the Boro bridges. The Tank section and adapter together create a form with an outer shape which is almost identical with the classic Boro tank.

    The SnailTank can be refilled through a large refill hole placed at the front upper side. It allows access to the RBA deck even when almost full with juice, any time, in the case of VapeShell and all bridges with a similar collaboration between chimney and deck (non-threaded, not extra tight via o-ring intervention between the two parts). Last but not least, it features a Chimney Gasket, which is added on the top side of the tank section to adjust the hole to the diameter of Boro standard bridge chimneys and offer some extra advantages. Among other things, it seals with the AIO 510 nut, even if you remove the sealing o-ring that most nuts or hybrid drip tips have. This eliminates the usual pain when the chimney of the bridge is automatically lifted up while unscrewing the nut/hybrid drip tip, and the bad sealing that most hybrid drip tips present, either because of normal tear and wear, or due to bad choice of o-rings. It is advised to remove the hybrid drip tip o-ring or the 510 nut o-ring to enjoy the best from the SnailTank.

    £ 27.99
    Earn up to 140 points.Select options
  • Cosmos V2 Booster Tip (Integrated) By Mission XV has built-in threading that allows direct integrated connection to the Astro, Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap airflow inserts for a fully customised draw and style. It features an updated base without a bottom o-ring to reduce connectivity and coin slots to tighten the base.

    The included swappable airflow inserts are placed in from the top, and the top part slides over to hold in place. The airflow insert bore diameters are are 4.5mm (without insert), 3mm, 2mm and 1.5mm.

    Features:
    • Stainless Steel
    • Updated Threading
    • Coin Slots To Tighten Tip
    • Updated Base (no o-ring)
    • Customisable Mid-piece & Tip
    • Integrated Billet Box Threading
    • 3mm, 2mm, 1.5mm Airflow Inserts
    • 4.5mm Bore Without Airflow Inserts

    £ 44.99
    Earn up to 225 points.Select options
×
×
×
×