The UK's #1 Advanced Vape Store

909 DotRBA By 909 Modify

£ 45.00

Save:18.2%
0 review  |  Write a review

Introducing the new 909 Modify DotAio RBA for the DotAio V1 and V2 By DotMod.

Specifications:
• Compatible With Dotmod DotAIO V1 & V2
• Original dotAIO V2 PC Tank with Plug
• Raised Chimney For Enhanced Flavor
• M2.5*3.5 Post Screws
• Building Deck Accommodate up to 3.0 Inner Diameter Clapton Coil
• One-Piece Air intake with Easy Adjustable Airflow Ring
• 14*1 Clear O-ring
• 304 Gold Plated Positive Post For Better Conduction.
• Stainless Steel Construction
• 510 Adapter
• Diagonal Bar Air Flow Ring Designed For Smoother Airflow

In stock

SKU: 909MOD-DOTRBA-SS Categories: , Tags: , , ,

Includes:
1 x 909 PCTG Juice Tank
1 x 909 dotRBA Deck
1 x 909 dotRBA 510 Adaptor
1 x Accessories Pack ( Juice Plug / Gaskets / O-Rings / Screws / Screw Driver / 510 Peek )
1 x Packing Box

This product is for advanced vapers only and requires technical knowledge in order to use it. Please read the disclaimer below before purchasing this product. DO NOT purchase if you are not comfortable or experienced with these types of atomisers.

Note: rebuildable coil/wick MUST be tested carefully with an ohm meter before use. If your builds are not tested prior to use, it is entirely at your own risk. Faulty wicks/coils WILL damage electronic devices. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protections. No new coil/wick assembly should NOT be used on an electronic device until known it is safe to do so.

Disclaimer: Rebuildable atomizers are for advanced vapers only with access to multimeters, high discharge batteries and a working knowledge of how electronic devices work. Please ensure care is taken as to not cause damage/harm to your atomizer, vaping devices, or yourself. Upon purchasing this product you agree that Custom Vapes UK, will not be held responsible to any injuries or property damage caused by using/misusing this product.

Warranty: Low Resistance Atomizers, Clearomizers, Cartomizers, RDA, RBA may not be returned if they have been filled/built/used unless the product was defected upon receipt and we are notified within 48hrs. We strongly recommend the use of an ohm meter to check resistance for possible shorts. Due to hygiene reasons and the nature of low resistance sub ohm builds, the use of third party units/mods or non approved chargers, no returns are accepted on any atomizers and Li-Ion batteries unless the product was defective upon receipt or dead on arrival (DOA) and we are notified within 48hrs. For more information please refer to our returns policy.

Weight 115 g

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • Introducing the new sleek looking 909 Modify 510 Drip Tips

    Specifications:
    • Designed to match dotAIO seamlessly and fit for others too.
    • Delrin base
    • Anodized aluminum top piece
    • One set of extra O-ring

    £ 9.99
  • The DotAIO V2 is an all-in-one regulated box mod designed by Dotmod. Powered by an 18650 battery, the DotAIO V2 has a removable reservoir, a TFT screen on the edge and a maximum adjustable power of 75W.

    Features:
    • 5 – 75W Output Range
    • Requires Single 18650
    • MTL, DTL & RDTL Vaping
    • Advanced Chipset
    • Automatic Mode
    • Bypass Mode
    • Variable Wattage Mode
    • Temperature Control Mode
    • 2ml Refillable Pods
    • Mesh Coils

    Additional Custom Products
    909 Modify Drip Tip (click here)
    909 Modify DotRBA (click here)
    Dotshell RBA (click here)
    DotMission RBA (click here)

    £ 89.99
  • The DotShell is a dedicated RBA for the dotAIO by Dotmod. Based on the VapeShell, yet taking quite some steps forward, the DotShell introduces all features of RBAs to the world of AIO devices. The DotShell utilises the top part of dotAIO’s stock reservoir and incorporates an adaptation of dotAIO RBA’s AFC system, with real time access to further customise the air flow under the coil.

    The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience with no need of AFC Ring adjustment.

    Features:
    • Air Flow Tuning Via AFC Ring + Pos. Tube
    • Spare Pos. Tube Airflow 0-2mm Dia
    • Stock Pos. Tube Airflow 0-3.8mm Dia
    • 4.2mm Maximum Coil Height In Chamber
    • 2.5mm Pan Head Phillips Post Screws
    • SS316F & PEEK Insulators

    £ 71.99£ 76.99
  • The DotMISSION RBA for the DotAIO features beautiful sleek lines and unique two-tone shades. Meticulously designed for the ultimate experience between form and purpose that’s out of this world.

    The DotAIO just got even better.

    Features:
    Blackout Edition

    • DotAIO Stainless Button
    • Black Anodised Chimney
    • Extended Juice Capacity
    • Supports Up To 3mm Coils
    • Wire Relief Cutouts & Seating
    • Airflow Reducers 1.0mm, 1.5mm, 2.5mm, 3.5mm

    Standard Edition
    • Extended Juice Capacity
    • Easy Build Two Post Deck
    • Supports Up To 3mm Coils
    • Wire Relief Cutouts & Seating
    • Airflow Reducers 1.2mm, 2.1mm, 3.5mm

    £ 104.99£ 114.99
×
×
×
×