The UK's #1 Advanced Vape Store

MTL

Display:  List Grid

Showing 1–16 of 44 results

    • The GeekVape Geek Bar disposable e-cigarette device features an internal 500mAh battery, and contains 2ml of 20mg nic salt e-liquid offering up to 575 puffs. Available in a wide range of flavours, the Geek bar disposable pod has a constant power output and consistent taste system for a truly satisfying vape experience.

      Features:
      • MTL Disposable Pod Kit
      • 500mAh Built-In Battery
      • Manual draw activation
      • LED Battery Life Indicator
      • 2ml Pod Capacity
      • Organic Cotton Wick
      • 20mg nic salt e-liquid
      • 575 puffs
      • Recyclable

      £ 4.99
    • Elf Bar disposable vape kit is compact, simple and delivers a smoother vape. Each bar contains enough e-liquid and a large enough battery to outlast 20 cigarettes – at a fraction of the cost. Requiring no upkeep including refilling and recharging, it offers a genuine hassle-free vape experience and can be used straight out of the box. Available in a range of flavours, there’s an Elf to suit most vapers.

      Features:
      • Compact Disposable Kit
      • Beginner-Friendly
      • 600 Puffs Per Bar
      • Inhale Activated
      • 20mg Nic Salt
      • Smooth MTL Throat Hit

       

      £ 4.99
    • This unique 510 Tip allows users to swap sleeves as well as bore inserts for fully customised draw and style.

      The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.

      The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.

      Features:
      • Visible Height: 13mm
      • Body Diameter: 11mm
      • Base Diameter: 13mm
      • 4 x Stainless Bore Inserts

      £ 34.99
    • This unique Drip Tip has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices, and allows users to swap sleeves as well as bore inserts for fully customised draw and style.

      The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.

      The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.

      Features:
      • Visible Height: 13mm
      • Body Diameter: 11mm
      • Base Diameter: 13mm
      • 4 x Stainless Bore Inserts
      • Integrated Billet Box Threading

      £ 34.99
    • This unique 510 Tip allows users to swap sleeves as well as bore inserts for fully customised draw and style.

      The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.

      The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.

      Features:
      • Visible Height: 13mm
      • Body Diameter: 11mm
      • Base Diameter: 13mm
      • 4 x Stainless Bore Inserts

      £ 34.99
    • This unique Drip Tip has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices, and allows users to swap sleeves as well as bore inserts for fully customised draw and style.

      The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.

      The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.

      Features:
      • Visible Height: 13mm
      • Body Diameter: 11mm
      • Base Diameter: 13mm
      • 4 x Stainless Bore Inserts
      • Integrated Billet Box Threading

      £ 34.99
    • The Alien RBA was designed to replace the boro tank of your Billet Box and Delro devices and incorporating a Reaper style deck to provide fantastic flavour. It has a tight fit and a direct air path designed to keep condensation to a minimum.

      To use the Alien RBA in the Billet Box the large EVL engraving must face forward so the air intake aligns with the air ports on the side of the Billet Box.

      To use the Alien RBA in the Delro the small EVL engraving must face forward exposing the air intake below the engraving.

      Filling is simple and must be filled holding the device upside down. This allows for maximum filling with no chance of flooding/over saturating the coil. (Filling the device on its side will cause a mess)

      Features:
      • 316 Stainless Steel
      • PEEK Insulators
      • Polycarbonate or Amber Ultem Tank
      • Airflow Insert Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
      • EVL Tin Including Muji Organic Cotton
      • Spares Pack: All O-rings + Two Spare Post Screws

      The Alien RBA was designed for use with original Billet Box and Delro boro devices and we are therefore unable to guarantee it fitting in any other devices.

      £ 124.99
    • The Spot RBA was designed to replace the tank of your DotAIO and incorporating a Reaper styled deck to provide fantastic flavour. It has a tight fit and a direct air path designed to keep condensation to a minimum. Filling is simple and must be filled holding the device upside down. This allows for maximum filling with no chance of flooding/over saturating the coil. (Filling the device on its side will cause a mess)

      Features:
      • 316 Stainless Steel
      • PEEK Insulators
      • Polycarbonate or Amber Ultem Tank
      • Airflow Insert Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
      • EVL Tin Including Muji Organic Cotton
      • Spares Pack: All O-rings + Two Spare Post Screws

      The Spot was designed for use with original DotAIO parts and we are therefore unable to guarantee the fitting of third party parts. Fitting of third party parts is done at your own risk.

      £ 98.99£ 99.99
    • Cherry Cola, feel the fruit and fizz collide with this cool classic cola and cherry combo.

      50/50 VG/PG
      10ml 5/10/20mg

      £ 3.99
    • Fresh Blueberry. Beat the flavour blues and launch into blueberry bliss with this banging berry sensation.

      50/50 VG/PG
      10ml 5/10/20mg

      £ 3.99
    • Lemon Mint, a zesty punch of lemon coupled with absolute mint madness to give a refreshing citrus blast to your taste buds.

      50/50 VG/PG
      10ml 5/10/20mg

      £ 3.99
    • Sweet Strawberry, keep it sweet admist the mayhem with this juicy strawberry vape, authentic strawberry satisfaction guaranteed.

      50/50 VG/PG
      10ml 5/10/20mg

      £ 3.99
    • Triple Mint, an icy triple threat to give you the ultimate minty blast you’ve been serching for with spearmint, peppermint & menthol.

      50/50 VG/PG
      10ml 5/10/20mg

      £ 3.99
    • Watermelon Ice, go wild for flavour with fresh watermelon, then a mental mash up of icy koolada and menthol.

      50/50 VG/PG
      10ml 5/10/20mg

      £ 3.99
    • The Innokin T18E / T22E replacement coils are a selection of cross-compatible coils that can be used with a wide range of Innokin kits and tanks. This includes the classic Endura T22E and Endura T18E vape tanks, as well as the Innokin M18 pod kit. They can also be used with the Innokin T22 Pro kit and T18 Pro Tank.

      Features:
      Innokin Cross-Compatible Coils
      Supports MTL Vaping
      Compatible With 50/50 & High PG E-Liquid

      Contains:
      5 x Innokin Prism 1.5Ω Replacement Coils

      £ 7.99
    • The Innokin Endura T22 pro vape kit combines simplicity with customisation. Powered by a built-in 3000mAh battery, it supports MTL (Mouth To Lung) vaping and produces a smaller amount of vapour. Thanks to four selectable power levels up to 13.5W, it’s quick to set-up and easy to maintain – but can still be adjusted to deliver your perfect vape. Each kit comes complete with the Innokin T18E Pro tank that can hold 2ml of e-liquid and a T18 Pro 1.7 Ohm coil.

      Features:
      • 13.5W Max Output
      • MTL Vaping
      • Large Built-In Battery
      • Beginner-Friendly
      • 2ml Tank
      • Top Filling
      • Range Of Coils
      • Compatible With High PG E-Liquid

      £ 32.99
×
×
×
×