Features:
• 100% Organic Cotton Wick
• Four Large Wicking Holes
• Press-fit – Thread-less Installation
• Pack of 5 x 1.0Ω MTL Coil Heads
• Pack of 5 x 0.4Ω Kanthal Mesh Coil Heads
• Compatible with Druga Narada Pro
No products in the basket.
coils
Display:
Showing 1–16 of 37 results
-
£ 10.99The Aspire Cloudflask replacement coils are designed for use with the Aspire Cloudflask pod kit and replacement pods only. These sub ohm coils feature a mesh wire construction providing a lengthy lifespan as well as enhanced flavour and cloud production.
Features:
• Sub Ohm Vape Coils
• Mesh Coil Structure
• 0.6 Or 0.25 Ohm Resistance
• Suited To High VG E-LiquidsProviding a larger surface area to heat e-liquid, due to the mesh structured coil, clear flavour is delivered consistently. A practical push fit system makes installing the coils into the pods a simple process. With a 0.25 or 0.06 Ohm resistance, these coils are best suited to high VG e-liquids of 60% and above for optimum performance.
-
£ 8.00
Tried and tested to be the finest Alien coils constructed using Juice Junkie wires.
Choose from 2 Specs:
• 3 x 26g n80 Cores
• 36g n80 Fuse/Alien
• 3mm ID
• 5 Wrap
• .10 ohms (Dual Coil)
• Ultrasonic Cleaned
• Quality Checked
• 1 Pair Of Aliens (2 Coils)
…………………………………………..
• 3 x 27g n80 Cores
• 36g n80 Fuse/Alien
• 2.5mm ID
• 5 Wrap
• .11 ohms (Dual Coil)
• Ultrasonic Cleaned
• Quality Checked
• 1 Pair Of Aliens (2 Coils) -
£ 7.99
The Innokin T18E / T22E replacement coils are a selection of cross-compatible coils that can be used with a wide range of Innokin kits and tanks. This includes the classic Endura T22E and Endura T18E vape tanks, as well as the Innokin M18 pod kit. They can also be used with the Innokin T22 Pro kit and T18 Pro Tank.
Features:
Innokin Cross-Compatible Coils
Supports MTL Vaping
Compatible With 50/50 & High PG E-LiquidContains:
5 x Innokin Prism 1.5Ω Replacement Coils -
£ 11.99
The Uwell Caliburn G replacement vape coils have been designed for use with the Uwell Caliburn G pod kit and replacement pods only. These coils are available as two variants; a 0.8 Ohm mesh coil as well as a 1.0 Ohm standard MTL coil.
Features:
• Uwell Caliburn G Coils
• Plug & Play Coil Design
• Mesh Coil / Standard MTL Coil
• 0.8 Ohm / 1.0 Ohm Resistance
• Suited To 50% PG E-Liquids Or HigherThe 0.8 Ohm mesh coils feature a larger surface area to heat e-liquid for enhanced flavour and vapour production, delivering a restricted DTL (Direct To Lung) inhale. The standard 1.0 Ohm coils deliver a long-lasting MTL (Mouth To Lung) vape with clear flavour throughout. A simple plug and play coil design allows for an easy installation and removal into and from the pods. We recommend pairing with PG e-liquids of 50% and higher for best results.
-
£ 13.99
RPM2 Replacement Coils
• 0.16 ohm mesh sub ohm coil (25-50W)
• 0.6 ohm DC coil (12-25W) for MTL vaping.Includes:
1 x 5 Pack of Smok RPM 2 Coils -
£ 14.99
The OXVA UNI vape coils have been designed for use with the OXVA Origin Kit. These replacement vape coils are available in a 0.3 Ohm, 0.5 Ohm and 1.0 Ohm resistance, meaning there’s an option for mouth to lung and direct to lung vaping. Combining quality and organic cotton they deliver improved flavour from e-liquid.
Features:
• OXVA Origin Replacement Coil
• Supports MTL & DTL Vaping
• Compatible with High VG & High PG E-Liquid
• 5 x OXVA Origins Replacement Vape Coils -
£ 13.99
Voopoo PnP-VM5 mesh coil 0.2Ω or PnP-VM6 mesh coil 0.15Ω and VM3 0.45Ω options.
Compatible with the following Voopoo tanks/kits:
- DRAG X MOD POD KIT
- DRAG S MOD POD KIT
Wattage range 40-60W.
Voopoo suggests regular juice and nicotine less than 10mg with these coils but this may depend on the device you’re using, so please double-check the manufacturer’s website for your particular product if you’re not sure.
-
£ 19.99
Blue:
• 3-31/38g 5 wrap 2.5mm
• Single Coil 0.50Ω
• Two coils included
• TMN80Pink:
• 3-32/38g 5 wrap 2.5mm
• Single Coil 0.65Ω
• Two coils included
• TMN80 -
£ 8.00Spin Doctor Premium Pre Hand Made coilsMTL Clapton
4 x Per Pack
Specifications:
• 2x32g /40g N80
• 1.1Ω approx per coil
• 2.5mm ID• 100% Juice Junkie wire
• Ultrasonically Cleaned -
£ 8.99 – £ 13.99
The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits. You can choose the 0.17ohm Conical Mesh Coil (5PCS) or the RBA Coil (1PC). The RPM80 RGC Conical Mesh Coils powered by nexMesh technology, bring you the warm throat hit and massive cloud. The RGC RBA Coils allow you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.
Features:
• The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits only.
• 0.17ohm Conical Mesh Coils (5PCS) deliver the fast heating rate, intense vapor production and unparalleled flavor.
• The RGC RBA Coils(1PC) allow you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.Specifications:
RGC RBA Coil: Pre-installed 0.6ohm Clapton Coil
0.17ohm RGC Conical Mesh Coil: Recommend at 40 – 80W; with a screwdriver for convenient rebuilt. -
£ 12.99
Smok RPM coils must be used with the corresponding RPM40/RPM80 Pods
Features:
• Available in a pack of five (5) coils
• Fast ramp up time
• Organic cotton wicking material
• Sub Ohm and Mouth to Lung optionsCoil Resistances:
0.3Ω mtl mesh, 0.4Ω mesh, 0.6Ω triple, 0.8Ω mtl, 1.0Ω, 1.2Ω Quartz and a RGC Coil & RBA Option (click here) -
£ 12.99
Narada Pro replacement coil heads are available in both 1.0Ω MTL and 0.4Ω Kanthal mesh variations. These coil heads slot easily into the Narada’s reusable cartridge thanks to a press-fit coil installation method. Each replacement coil head features 100% organic cotton for the best flavour possible, while the four large e-liquid holes improve the speed at which e-liquid is absorbed, eliminating the possibility of a dry hit.
-
£ 13.99
PnP-VM1
Resistance: 0.3Ω
Type: Mesh Coil
Power Range: 32~40WPnP-M2 DL
Resistance: 0.6Ω
Type: single mesh
Power Range: 20~28W -
£ 11.99
Narada replacement coil heads are available in both 0.5Ω SS316 and 0.6Ω Kanthal mesh variations. These coil heads slot easily into the Narada’s reusable cartridge thanks to a press-fit coil installation method. Each replacement coil head features 100% organic cotton for the best flavour possible, while the four large e-liquid holes improve the speed at which e-liquid is absorbed, eliminating the possibility of a dry hit.
Features
100% Organic Cotton Wick
Four Large Wicking Holes
Press-fit – Thread-less Installation
Pack of 5 x 0.5Ω SS316 Coil Heads
Pack of 5 x 0.6Ω Kanthal Mesh Coil Heads
Compatible with Druga Narada -
£ 19.99
Slightly thicker core wire makes these 3mm coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.
-
£ 19.99
5 x KA1 0.4 ribbon core wire framed 2 x 27 makes these 4 wrap coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.
2-27/5-0.4/36g 4 wrap 3mm .12Ω dual
Twisted Messes wire
