The UK's #1 Advanced Vape Store

Accessories

Display:  List Grid

Showing 49–64 of 207 results

    • Vaporesso Billet Box EUC Universal Standard Coil Bridge

      This is made to fit the standered billet box borrow tank
      (not the A tank)

      Manufactured in the UK by Signature tips

      Includes:
      Stainless Steel Bridge Tube
      Stainless Airflow Base

      £ 27.99
    • BilletBox Flush Fit 510 Adapter

      Manufactured In the UK By Signature Tips and Modified Design By KRV

      £ 14.99
    • Billet Box 510 Tool

      Manufactured In the UK

      £ 8.99
    • The DotShell is a dedicated RBA for the dotAIO by Dotmod. Based on the VapeShell, yet taking quite some steps forward, the DotShell introduces all features of RBAs to the world of AIO devices. The DotShell utilises the top part of dotAIO’s stock reservoir and incorporates an adaptation of dotAIO RBA’s AFC system, with real time access to further customise the air flow under the coil.

      The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience with no need of AFC Ring adjustment.

      Features:
      • Air Flow Tuning Via AFC Ring + Pos. Tube
      • Spare Pos. Tube Airflow 0-2mm Dia
      • Stock Pos. Tube Airflow 0-3.8mm Dia
      • 4.2mm Maximum Coil Height In Chamber
      • 2.5mm Pan Head Phillips Post Screws
      • SS316F & PEEK Insulators

      £ 71.99£ 76.99
    • The VapeShell is Atmizone’s RBA bridge concept for the Billet Box rev4 Boro tank and compatible tank systems. From loose lung hit to MTL, it will suit your vaping habits, with the classic air flow pins and air flow control ring included out of the box.

      The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience, with extra precise adjustment using the AFC ring.

      Features:
      • 2mm, 2.5mm, 3mm, 3.5mm Dia Air Flow Tuning Pins~
      • No Pin Air Flow Dia 4mm. Fine Adjustment With AFC Ring
      • 2 x 2.5mm E-liquid Intake Holes At Base Of Deck
      • 5.5mm Maximum Coil Height In Chamber
      • 2.5mm Pan Head Phillips Post Screws
      • SS316F & PEEK Insulators

       

      £ 64.99
    • The MTL Air Flow Pin Kit reduces the positive tube’s initial 4mm hole diameter down to 1mm, 1.2mm and 1.5mm respectively, offering the ideal air flow for a substantial range of MTL vaping profiles.

      Features:
      • Compatible With DotShell & VapeShell
      • Laser Engraved Hole Diameter On Pins
      • 1mm Hole Diameter Air Flow Tuning Pin
      • 1.2mm Hole Diameter Air Flow Tuning Pin
      • 1.5mm Hole Diameter Air Flow Tuning Pin

       

      £ 10.99
    • Uwell Caliburn Koko Replacement Pod 1.2 Ohm

      The cartridge has a 2ml capacity and a built in coil.

      4 x Uwell Caliburn Koko Pods

      £ 11.99
    • Each Uwell Caliburn replacement pod has a 2ml capacity and is fitted with a 1.4ohm integrated coil.
      Sold in packs of 4 pods. Also fits onto the new Caliburn Koko Pd Kit.

      4x replacement pods

      £ 11.99
    • PnP-VM1
      Resistance: 0.3Ω
      Type: Mesh Coil
      Power Range: 32~40W

      PnP-M2 DL
      Resistance: 0.6Ω
      Type: single mesh
      Power Range: 20~28W

      £ 13.99
    • The Vaporesso Degree Replacement Pod is designed for use with the Vaporesso Degree pod device only. With a 2ml e-liquid capacity, there are two versions of this pod available for either MTL (Mouth To Lung) vaping or DTL (Direct To Lung) vaping, depending on your preference.

      Features:
      • 2ml E-Liquid Capacity
      • Push To Fill Refill Method
      • Easy Insertion Process

      • 0.6 Ohm Mesh Coil (15-23w)

      • 1.3 Ohm CCELL (17-12.5w)

       

      Includes:
      x 2 Pack Replacement Pod Cartridge

      £ 4.99
    • The standard tank section on the KRMA GEN by Mission XV holds 1ml of E-liquid. This tank extension allows you to increase the capacity to 2ml.

      £ 23.99
    • Narada replacement coil heads are available in both 0.5Ω SS316 and 0.6Ω Kanthal mesh variations. These coil heads slot easily into the Narada’s reusable cartridge thanks to a press-fit coil installation method. Each replacement coil head features 100% organic cotton for the best flavour possible, while the four large e-liquid holes improve the speed at which e-liquid is absorbed, eliminating the possibility of a dry hit.

      Features
      100% Organic Cotton Wick
      Four Large Wicking Holes
      Press-fit – Thread-less Installation
      Pack of 5 x 0.5Ω SS316 Coil Heads
      Pack of 5 x 0.6Ω Kanthal Mesh Coil Heads
      Compatible with Druga Narada

      £ 11.99
    • The Narada RBA provides a simple yet effective two post deck perfect for building both MTL as well as DTL coil configurations. Constructed of high quality stainless steel, the Narada RBA is installed into the Narada cartridge in a similar fashion to the disposable coil heads thanks to a press-fit design. Each post makes use of a phillips screw in order to secure the lead, while the base of the unit makes use of a proprietary gold plated connection granting the Narada RBA impressive conductivity.

      Features
      Threaded Assembly
      Two Post Build Deck
      Press-fit Installation
      Phillips Screw Heads
      Proprietary Gold Plated Connection

      Contents:
      1 x Narada RBA Deck
      1 x Narada RBA Empty Cartridge
      20 x Pre-made 1Ω Kanthal Coils

      £ 13.99
    • Features:

      • Child Resistant Cap on all LDPE Unicorn Bottles
      • Twist off Plastic Tamper Evident Ring
      • Slim, Convenient, Travel-Easy Design
      • Easy-Pour, Narrow Drip Tip for Spill-Free Dispensing
      • Never Worry About Leaks Damaging Your Other Stuff or Wasting Anything
      • Ease-Squeeze Construction for Consistent and Natural Flow Rate
      • Pressure Sealed Tested for Maximum Durability # Embossed With Proprietary, Signature Gorilla Logo as a Stamp of Absolute Quality
      • Designed & Engineered In California USA
      £ 1.50
    • Slightly thicker core wire makes these 3mm coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.

      £ 19.99
    • 5 x KA1 0.4 ribbon core wire framed 2 x 27 makes these 4 wrap coils produce thick, dense flavour and vapour production. Perfect build to pair up with your favourite mechanical device.

       

      2-27/5-0.4/36g   4 wrap 3mm .12Ω dual
      Twisted Messes wire

      £ 19.99
×
×
×
×