No products in the basket.
Purple
Display: 
Showing all 16 results
£ 24.99Taking its name from the legendary sword, the Caliburn by Uwell is a powerful yet small mouth to lung pod system. Boasting a 520 mAh in its sleek aluminium body, the Caliburn is both light and compact but still delivers great battery life due to its 1.4 ohm coil pods. These pods are simple to fill / replace and have a clear window on each side so you can always see how much eliquid is remaining. Knowing that not everyone vapes in the same way, Uwell have included both inhale activation and button firing which also doubles for locking the device. A fantastic little MTL pod device, the Caliburn lives up to its legendary name!
Specifications:
• Built in 520 mAh Battery
• Button or inhale activated firing
• Pod filling
• Compact and ergonomic design
• 2ml tank
• Nic Salt Ready
• Micro USB charging
• Windowed pod for visible eliquid level
• Perfect for MTL vaping
• 110mm x 21.2mm x 11.6mm- £ 29.99 – £ 34.99
The PAL II Kit, a collaboration between Tony B and Artery, is a pod system based AIO Kit equipped with 2 outstanding coils, one is 0.6om Mesh coil for prominent flavor and huge vapor, the other is 1.2ohm regular coil for satisfying MTL vape. Moreover, it features 1000mAh large battery capacity for long lasting vaping and an easy filling system for convenience.
Features:
Size: 43x 17x 83mm
Material: Aluminum 6063
Voltage: 3.2- 4.2V
1000mAh built-in battery
Juice capacity: 2.0ml
Features:
-Side refilling system
-Classic & Compact design
-Adjustable bottom airflow system
-Innovative MTL coil and Mesh coil
-Overcharge protection, overheat protection
-Cut-off at 8 seconds, short circuit protectionIncludes:
1x Artery Pal 2 Kit
1x Extra Coil
1x USB Cable
1x User Manual
1x Extra Plug
2x O-rings
1x Warranty Card
1x Certification Card Express yourself!
2 piece aluminum color caps for any occasion. Anodized and a perfect fit for the Axial RDA.
£ 16.99£ 9.99Hellvape Rebirth RDA Atomizer is a combination of great work between Youtube reviewer Mike Vapes and Hellvape. It is an intelligent product by Mike’s, and made by Hellvape. Rebirth RDA Atomizer is 2 post build deck with gold plated positive post, and 6mm deep juice well with raised bottom airflow to prevent leaking with 24mm diameter. It is great work.
Specifications:
• 24mm diameter
• 2 post build deck with gold plated positive post
• 2.5 by 3.5 mm post holes
• 16 1.2 mm bottom adjustable honeycomb airflow for each side
• Top cap locking system with adjustable airflow
• 6mm deep juice well with raised bottom airflow to prevent leaking
• Flat head screws
• 810 Cobra drip tip and 810 frosted drip tip included
• Gold plated squonk pin included
• With coily tool the correct length to cut coils is 6.5mm£ 24.99£ 19.99- £ 29.99The Vaporesso Cascade One is an elegant pen-style starter kit with 1800mAh built-in battery and innovative Cascade Mini Tank. Powered by the advanced Omni Board Mini chip, Cascade One Starter Kit will bring you an excellent and safe vaping.
Features:• 1800mAh Excellent Pen-style Starter Kit
• Advanced Omni Board Mini Chip to Ensure High Performance
• Unique Isolation Structure of Cascade Tank to Intense Flavors
• Revolutionary Triangular Airflow to Produce Denser Cloud
• Top Fill System with Safety Lock Mechanism
• GT Mesh Coil to Enlarge Heating Area and Offer Great Flavor
• 2A Quick Charge
• 510 Tip threadGT CCELL2 0.3ohm Replacement Coils - £ 17.99
The Vaporesso Orca Solo AIO Starter Kit presents an advanced all-in-one vape pen crafted for portability, integrating the OMNI Board Mini with 800mAh rechargeable battery with Flash Heat System and the utilisation of OC CCELL Coil. Designed with simplicity and travel-friendly in-mind, the Vaporesso Orca Solo adopts a standard cylindrical design in a compact setting while maintaining a beautiful metal gloss. The Orca Solo is powered by a built-in rechargeable 650mAh battery, with colourful LED light indicator to provide instant battery life feedback and capable of fast-charging via micro USB port. The Orca Solo AIO utilises the new 1.3ohm OC CELL Coils with ceramic heating elements for a flavourful and consistent vape with longer-lasting capability.
The Littlefoot RDA by WAKE is a 24mm squonk-ready dripping atomizer with a timeless, classy aesthetic. Noteworthy features include an intuitive two-post clamp design, a massive 8mm juice well, and a super comfortable frosted acrylic 810 Drip Tip. The adjustable side airflow is notably smooth and efficient. Consistent with WAKE’s previous releases, the focus is clearly on flavour and aesthetics. The Littlefoot RDA’s hard anodized aluminum cap, available in a rainbow of matte colors, blends with mirrors of gold plating to create an unrivalled finish.
Specifications:
• 24mm Diameter
• Squonk Ready (Squonk Pin & Normal Pin Included)
• Gold Plated Stainless Steel Construction
• Intuitive Two-Post Clamp Design
• Massive 8mm Juice Well
• Custom Post Screws
• Hard-Anodized Aluminum Top Cap
• Frosted Acrylic 810 Drip Tip£ 39.99£ 9.99- Customise your CS1 squonk with high quality anodized aluminium door panels.2 x Door Panels
£ 29.99£ 24.99 The iconic Purge deck has been redesigned as the Carnage V1 RDA.
The two post system allows for easy builds with 2 large posts. The cap has a new design which now features an adjustable airflow.
This 25mm RDA has a solid copper 510 pin with a silver plated squonk pin included and extra o-rings.
Features:
• 25mm
• Adjustable airflow
• Squonk compatible ( once pin is installed )
• Ultem drip tip ( compatible with Purge / Kennedy / Goon / Comp lyfe drip tips )
• Solid copper 510
• Brass
• Two post design
• Deep juice well
• Engraved carnage logo£ 69.99£ 59.99Spare bottles for the DS or TS Squonk by Defiant Designs.
Package Includes:
• five 10ml bottles
• five travel inserts with clear caps
• one stainless steel squonk cap and straw£ 19.99£ 14.99Introducing the new DS Dual 18650 Squonk Mod by Defiant Designs.
Specifications:
• Anodised aluminium body and components
• Dual or triple parallel 18650 configurations
• Gold plated copper internals & negative contacts
**The positive contact has been updated and now self-centers the companion components
***The negative contacts have been updated to a stronger design while maintaining their polarity protection
• Two 10ml capacity bottles
• Complete set of replacement internal and external Allen screws and O-rings
• Two SS squonk caps and straw’s
• Two travel inserts and caps for the bottles
• Two spare magnets
• 1.5mm allen driver
• SS key for the negative battery contacts
• Optional firmer spring for the fire button£ 125.00£ 69.99Introducing the new TS Dual and Triple 18650 Squonk Mod by Defiant Designs.
Specifications:
• Anodised aluminium body and components
• Dual or triple parallel 18650 configurations
• Gold plated copper internals & negative contacts
**The positive contact has been updated and now self-centers the companion components
***The negative contacts have been updated to a stronger design while maintaining their polarity protection
• Two 10ml capacity bottles
• Complete set of replacement internal and external Allen screws and O-rings
• Two SS squonk caps and straw’s
• Two travel inserts and caps for the bottles
• Two spare magnets
• 1.5mm allen driver
• SS key for the negative battery contacts
• Optional firmer spring for the fire button£ 135.00£ 79.99The vapour community continues to evolve and Anchor is evolving with this stunning looking 3d printed Nano mechanical squonk box mod.
Specifications:
• Full Mechanical
• Single 18650
• German Nickel Silver Contacts
• ModMakers BF 510 16mm
• Specifically Designed MM BF 510 Safety Lock
• Food Grade Silicon Bottle With Ultem Cap
• SLS 3D Printed In Alumide
• Back Side Firing Button
• Front Door With Magnets
• 2 x Fire Button Locking Switch
• 72mm x 42.4mm x 24mm
• Can Accept Up To 24mm Atomizers With Zero Overhang
• All doors and fire button are textured gunmetal black£ 135.00£ 120.00Introducing the CS1 Squonk Mod, like no other the CS1 has special button features engineered to work with safety in mind. The sensor relies on the electrical properties of the human body to detect when the button is being touched by you, and not the things you carry in your pocket. Be at ease knowing your mod will work only where it needs to – in your hands.
Specifications:
• Low resistance PCB mounted MOSFET
• 8ml soft silicone bottle
• Single 18650 battery power source (not included)
• Recommended coil resistance of .2 ohm
• Capacitive Safety – The sensor relies on the electrical properties of the human body to detect when the button is being touched and/or pressed
• Coloured LED battery indicator – Four color states to quickly and easily determine remaining charge of the batteries
• Alumide body and anodised aluminium doors for optimal wear protection.
• Three position master switch – With a flick of a switch, you can bypass the capacitive function or turn the mod off completely
• Silicon wires – All wires in the CS1 are silicon-sheathed and meant for high current applications. These wires are super flexible, strong, and are rated
for temperatures up to 200°C
• Mitec switch – Flat, durable, stainless steel anti-vandalism button with IP54 protection classification and rated for 100,000 on/off cyclesCheaper Version S2 Squonk Mod (click here)
£ 220.00£ 199.99- £ 11.99
These iconic bandanas have been seen among all types of people (and animals) around the world!
Introducing the Goon RDA Anodized 24mm caps to customise your Goon RDA’s.
Anodized Sleeve & Top Cap Only
Choose from 5 hot colours
£ 24.99£ 19.99
