The UK's #1 Advanced Vape Store

Gold

Display:  List Grid

Showing 1–16 of 18 results

    • The DotAIO Mini is the newest all in one device to come from Dotmod, as to be expecting attention to detail hasnt been missed, a smooth and faultless design very much like the orignal DotAIO but now smaller.

      Powered by a single 18350 battery (Not Supplied) this small little device still offers the same power settings as the orginal and is also cross compatible with all existing RBA’s and tanks, the major chahttps://www.custom-vapes.co.uk/product/efest-10-5a-18350-700mah-flat-top/nge other than it size is the all new side airflow intakes which will allow for increased and a smoother airflow, coming with the DotAIO Mini is the new version of 0.7ohm coil.

      The DotAIO mini also features dry burn protection that cuts the current when the e-juice level is low which in turn extends the life of your coils, with the DotAIO’s easy to remove 2ml tank, changing coils has never been easier. The ergonomic spring-loaded contact located under the tank section allows for easy tank removal, offering 4 power output settings based on the coil resistance (Very Soft, Soft, Medium, Strong) which is designed to fulfill your preferences and deliver the best performance possible from an AIO.

      £ 65.99
    • The Purge X 28.5mm RDA by Purge Mods, an RDA designed for a variety of coil builds and immense flavour and cloud production.

      A post-less system allows for easy builds and has a generous area for cotton wicking and juice filling. The deck is made from stainless steel which eliminates corrosion and has gold plated positive and SS terminals for great conductivity. The Purge X RDA comes with 2 AFC rings; triple slotted for large airflow or honeycombed for flavour.

      This 28.5mm RDA has a copper 510 pin with a gold plated squonk pin included and extra o-rings.

      Features:
      • 28.5mm complete
      • 2 x AFC rings ( triple slotted and honeycombed )
      • 28mm deck accommodates existing Purge caps
      • Unique island style deck for more spaceWide post terminals for large builds
      • Gold plated positive post
      • Gold plated squonk pin
      • Copper 510 pin
      • 810 wide bore drip tip
      • Can be used in dual or single coil mode
      • Designed in USA made in China

      £ 49.99
    • Purge X RDA 25mm

      Specifications:
      • 25mm deck sized to fit all our previous PURGE RDA Caps!
      • Comes with 2 airflow sleeves
      • 1 triple slotted and angled, for wide open airflow and cloud production
      • 1 honeycombed, for a restricted vape offering the best flavor production
      • Unique Island-Style deck offering a wide build space with several coil placement options, and an ample space for cotton which will allow for more juice saturation
      • Gold plated Positive Post
      • Gold Plated Squonk Pin
      • Copper 510 Pin
      • Wide Post Terminals for large coil builds
      • Can be used in dual or single coil mode

      Purge “X” is a Postless RDA designed in the USA by Purge Mods and manufactured in China

      £ 39.99
    • SMOK RPM Lite Kit, which is the lite version of Smok RPM40, smaller and lighter, with a simplified and concise design, single color side panel, no multiple color collocation. The RPM Lite is powered by a built-in 1250mAh battery, which can ensure enough running time and help you avoid frequent charging. Features micro USB charging port by 5V/1.2A fast charging. Working wattage adjustable from 1W to 40W and you can press UP/DOWN Button to adjust the power you preferred. A front panel with 0.96 inches TFT colorful screen, which will show detailed vaping data, such as the wattage, resistance, voltage, screen color, puff number, and battery level. In addition, SMOK RPM Lite is equipped with the same IQ-R chipset to accommodate the popular RPM Coil Series. SMOK RPM Lite Pod is a refillable 3.2ml pod, easy to side filling of e-liquid without leaking. The kit comes with two RPM coils: RPM Mesh 0.4ohm Coil and RPM DC 0.8ohm MTL Coil, which are made for pure taste. The SMOK RPM Lite pod mod Kit maintains the traditional intuitive button layout and a slew of safeties and protections, making this an ideal vape for beginners or advanced users.

      Specifications:
      • Size: 21*32*75mm
      • Weight: 50g
      • Battery Capacity: 1250mAh
      • Screen: 0.96inch TFT Screen
      • Output wattage: 1W-40W
      • Standby Current: <140uA
      • E-liquid Capacity: 3.2ml
      • Filling: Side filling
      • IQ-R chipboard
      • Coils: RPM Mesh 0.4ohm Coil, RPM DC 0.8ohm MTL Coil
      • Resistance Range: 0.3ohm-2.0ohm
      • Input Voltage: 3.3V-4.2V
      • Output Voltage: 0.5V-4.0V
      • Charging Voltage: 5V
      • Charging Current: 1.2A(Max)
      • Charging Port: USB Port
      • Overcharge Voltage: 4.3V
      • Over-discharge Voltage: 2.4V
      • Overcharge Current: 2.0A
      • Many Safety Features

      RPM Lite Spare Pods (sold separately)

      £ 25.99
    • Customise your RDA For Vaping with this coloured AFC (Air Flow Control) Ring Set. It includes 3 AFC rings that match those included with An RDA For Vaping.

      £ 15.99
    • The DotShell is a dedicated RBA for the dotAIO by Dotmod. Based on the VapeShell, yet taking quite some steps forward, the DotShell introduces all features of RBAs to the world of AIO devices. The DotShell utilises the top part of dotAIO’s stock reservoir and incorporates an adaptation of dotAIO RBA’s AFC system, with real time access to further customise the air flow under the coil.

      The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience with no need of AFC Ring adjustment.

      Features:
      • Air Flow Tuning Via AFC Ring + Pos. Tube
      • Spare Pos. Tube Airflow 0-2mm Dia
      • Stock Pos. Tube Airflow 0-3.8mm Dia
      • 4.2mm Maximum Coil Height In Chamber
      • 2.5mm Pan Head Phillips Post Screws
      • SS316F & PEEK Insulators

      £ 71.99£ 76.99
    • After years of trying tons of different RDA’s, Coilturd gives you An RDA For Vaping (or Coilturd RDA, whichever you prefer)

      Features:
      • 24mm RDA
      • 304 Stainless Steel Construction
      • PVD Coated Black & Gold
      • PEEK Insulators & 810 Drip Tip
      • Squonk & Non-squonk Pins
      • Extra O-rings & Grub Screws

      Coloured AFC Ring Sets (sold separately)

      £ 54.99
    • Custom Vapes Snapbacks

      • Black Snapback
      • True 3D embroidery
      • Premium quality
      • 100% cotton easy flex
      • Adjustable snap closure

      Select stitching colour below

      £ 9.99
    • The PAL II Kit, a collaboration between Tony B and Artery, is a pod system based AIO Kit equipped with 2 outstanding coils, one is 0.6om Mesh coil for prominent flavor and huge vapor, the other is 1.2ohm regular coil for satisfying MTL vape. Moreover, it features 1000mAh large battery capacity for long lasting vaping and an easy filling system for convenience.

      Features:
      Size: 43x 17x 83mm
      Material: Aluminum 6063
      Voltage: 3.2- 4.2V
      1000mAh built-in battery
      Juice capacity: 2.0ml
      Features:
      -Side refilling system
      -Classic & Compact design
      -Adjustable bottom airflow system
      -Innovative MTL coil and Mesh coil
      -Overcharge protection, overheat protection
      -Cut-off at 8 seconds, short circuit protection

      Includes:
      1x Artery Pal 2 Kit
      1x Extra Coil
      1x USB Cable
      1x User Manual
      1x Extra Plug
      2x O-rings
      1x Warranty Card
      1x Certification Card

      £ 14.99
    • Let’s unleash a little greatness with this Dead GOAT Kit. Flavour with this screw in rebuildable deck and top cap is out of this world. Please note the new cap is required to use the build deck and that is why they will not be sold separately. When other build decks are released they will be sold individually.

      Kit includes both squonk and non-squonk pins.

      Features:
      • Dead Goat Rebuildable Deck
      • Stainless Steel Top Cap With Mini Snake-bite Airflow Holes
      • Squonk & Non-squonk Pins

      £ 11.99
    • The much awaited GOAT (Greatest of all Time) by Duane (OhmBoy) and Nick (Grimm Green) is available in choice of Black, Blue, Gold, Gunmetal and Stainless Steel colour options.

      The GOAT delivers a consistent, reliable, quality vape every time by utilising a custom designed coil head. Using Anarchist wire in each coil, The GOAT delivers flawless performance with the cleanest wire ever made. Every last detail was expertly crafted to truly make it the “Greatest Of All Time” (GOAT, get it?) We evaluated every possible factor, from fine tuned airflow and conical shape to top cap height and coil elevation. We didn’t stop until we found the sweet spot. No more guessing what coils will perform well, just screw in a GOAT Coil Head, trim the wick, and you are ready to vape.

      Features:
      • 24mm Dripper
      • 304 Stainless Steel Construction
      • Coil Heads Squonkable, No Need To Change Pins To Drip
      • PVD Plated Stainless Steel Top Cap (Black, Blue, Gold & Gunmetal)
      • 1 x 0.13Ω Anarchist 22g Nichrome 80 Dual Coil Head #cloudsbroclouds
      • 1 x 0.19Ω Anarchist 24g Nichrome 80 Dual Coil Head #flavourbanger
      • 810 Drip Tip
      • PEEK Insulators
      • Replacement O-rings

      Add The Dead Goat RDA Kit £11.99 (click here)

      £ 19.99
    • Hellvape Rebirth RDA Atomizer is a combination of great work between Youtube reviewer Mike Vapes and Hellvape. It is an intelligent product by Mike’s, and made by Hellvape. Rebirth RDA Atomizer is 2 post build deck with gold plated positive post, and 6mm deep juice well with raised bottom airflow to prevent leaking with 24mm diameter. It is great work.

      Specifications:
      • 24mm diameter
      • 2 post build deck with gold plated positive post
      • 2.5 by 3.5 mm post holes
      • 16 1.2 mm bottom adjustable honeycomb airflow for each side
      • Top cap locking system with adjustable airflow
      • 6mm deep juice well with raised bottom airflow to prevent leaking
      • Flat head screws
      • 810 Cobra drip tip and 810 frosted drip tip included
      • Gold plated squonk pin included
      • With coily tool the correct length to cut coils is 6.5mm

      £ 19.99
    • The Vaporesso Cascade One is an elegant pen-style starter kit with 1800mAh built-in battery and innovative Cascade Mini Tank. Powered by the advanced Omni Board Mini chip, Cascade One Starter Kit will bring you an excellent and safe vaping.

      Features:
      • 1800mAh Excellent Pen-style Starter Kit
      • Advanced Omni Board Mini Chip to Ensure High Performance
      • Unique Isolation Structure of Cascade Tank to Intense Flavors
      • Revolutionary Triangular Airflow to Produce Denser Cloud
      • Top Fill System with Safety Lock Mechanism
      • GT Mesh Coil to Enlarge Heating Area and Offer Great Flavor
      • 2A Quick Charge
      • 510 Tip threadGT CCELL2 0.3ohm Replacement Coils
      £ 25.00£ 29.99
    • Designed by AmbitionZ VapeR and Hellvape the Aequitas RDA adopts innovative upside down barrel for 2 optional airflow. The four-post build deck makes building easy and fast.

      Features:
      • 24 mm diameter
      • Gold plated postless raised style deck
      • 2.5mm square post holes to handle any build you throw at it
      • 9mm by 2mm airflow slots
      • 2 options for airflow, top and bottom. Flip barrel upside down to make your choice
      • Flat head and allen key screws included
      • 810 resin drip tip,810 derlin drip tip & 510 stainless steel adapter included
      • Gold plated squonk pin included
      • Line up protruding lock on deck with opposite on barrel to properly align barrel to deck

      £ 9.99
    • dotBottle Set for dotSquonk  provides a wide range of our classic colours you won’t reach for the wrong flavor. Collect multiple bottles to trade your ejuice with your friends.

      The proprietary dotBottle boasts a 10ml e-juice reservoir with an ergonomic feel and shape that perfectly sits in the dotSquonk.

       

      Specifications:
      • Silicon Bottle Construction
      • 10ml Juice Reservoir
      • Designed for dotSquonk
      • Hand washable

       

      Colors:
      Red, Blue, Black, Gold, Clear, and Tiffany Blue

       

      Includes:
      One (1) silicon dotBottle
      One (1) plastic fill tube
      One (1) squonk ready ultem lid
      One (1) closed ultem storage lid

      £ 14.99
    • Made by popular demand introducing the Shorty X Mod by Sub Ohm Innovations. A little shorter and a sleek little sweeter!


      Specifications:

      • Single 18650
      • Two Piece Clutch Contact
      • Silver Plated Switch Components
      • Hybrid Atomizer Connection
      • High Flow Battery Safety Vents
      • Internal Short Protection Sleeve
      • 25mm Diameter by 88mm Length

      Finishes: Copper, Black Stainless, PVD Gold, and Stainless Steel.

      SZX Mini RDA (Sold Separately)
      SZX Hybrid RDA (Sold Separately)

      £ 69.99
×
×
×
×