The UK's #1 Advanced Vape Store

Black

Display:  List Grid

Showing 33–48 of 76 results

    • The Vaporesso Orca Solo AIO Starter Kit presents an advanced all-in-one vape pen crafted for portability, integrating the OMNI Board Mini with 800mAh rechargeable battery with Flash Heat System and the utilisation of OC CCELL Coil. Designed with simplicity and travel-friendly in-mind, the Vaporesso Orca Solo adopts a standard cylindrical design in a compact setting while maintaining a beautiful metal gloss. The Orca Solo is powered by a built-in rechargeable 650mAh battery, with colourful LED light indicator to provide instant battery life feedback and capable of fast-charging via micro USB port. The Orca Solo AIO utilises the new 1.3ohm OC CELL Coils with ceramic heating elements for a flavourful and consistent vape with longer-lasting capability.

      £ 17.99
    • The Vaporesso Cascade Tank is a 2ml vape tank, perfect for sub ohm vaping. As you’d expect from Vaporesso this is a well-machined piece of hardware that is easy disassemble and clean. The Cascade Tank pioneers the new Isolation Tank Structure. This structure reduces the amount of dry hits and increases flavour intensity by ensuring the cotton in your coil is always wicked when your tank is full.

      With sub ohm vaping and cloud chasing in mind, the Vaporesso Cascade features unique triangular airflow from three separate airflow holes, which are adjustable so you can find your ideal inhale.

      The Cascade also features a redesigned atomiser; the GTM Cascade Vape Coil, which feature a plug-and-pull style fitting. This means meaning that when it finally is time to change them, the coils are easy to remove and install. Filling your tank is made simple thanks to the top fill cap which slides open, with a juice hole big enough to fit most nibs on juice bottles.

      To top it all off, there are a range of coil resistances allowing the user to vape up to 200w if they choose. The Vaporesso Cascade Tank is innovative in its design and manufacturing and suits a high wattage setup.

      Features:
      • Isolation Tank Structure
      • 2ml Fill Capacity
      • Triangular Airflow
      • Top Fill
      • Plug and Pull Coils

      £ 29.99
    • You asked and so Defiant Delivered! The Silicone soft bottle is the addition to your squonking experience with the DS/TS Mod.

      • 9ml Capacity
      • SS cap System
      • Travel Cap Ready
      • Food Grade Silicone
      1 x Silicone Bottle

      £ 19.99
    • Introducing the next chapter in the CSMNT saga, the Layercake. This clamp style RDA only requires the tightening of a single screw to build.  The icing on the cake is CERAMISTEEL, a state of the art insulation technology developed by District F5VE with a higher melting point than most metals and strength that surpasses everything else on the market, this is an RDA built to last.

      Specifications:
      • Size: 24mm
      • Ceramisteel
      • Low Chamber
      • Signature Airflow
      • Squonk Ready
      • Deck O-Ring
      • Internal Sleeve Orings
      • Matching 810 ONETips Base & Black Top
      • Single Post Clamp with Ceramisteel Technology

      Extra Parts:

      1 x post screw
      5 x O-rings
      Beauty Ring: Stainless Steel, Black & Graphite.
      1 x 510 contact

      Colours: Stainless Steel, Black & Graphite

      £ 49.99 £ 9.99
    • Travel Cap for your LDPE DS/TS bottles

      SS or Black

      £ 9.99 £ 4.99
    • The Littlefoot RDA by WAKE is a 24mm squonk-ready dripping atomizer with a timeless, classy aesthetic. Noteworthy features include an intuitive two-post clamp design, a massive 8mm juice well, and a super comfortable frosted acrylic 810 Drip Tip.  The adjustable side airflow is notably smooth and efficient.  Consistent with WAKE’s previous releases, the focus is clearly on flavour and aesthetics. The Littlefoot RDA’s hard anodized aluminum cap, available in a rainbow of matte colors, blends with mirrors of gold plating to create an unrivalled finish.

      Specifications:
      • 24mm Diameter
      • Squonk Ready (Squonk Pin & Normal Pin Included)
      • Gold Plated Stainless Steel Construction
      • Intuitive Two-Post Clamp Design
      • Massive 8mm Juice Well
      • Custom Post Screws
      • Hard-Anodized Aluminum Top Cap
      • Frosted Acrylic 810 Drip Tip

      £ 39.99 £ 9.99
    • Customise your CS1 squonk with high quality anodized aluminium door panels.
      2 x Door Panels
      £ 29.99 £ 24.99
    • Gas Mods G.R.1 RDA Cap is created to match the Gas Mods GR1 RDA, and it is compatible with Gas Mods Drip Tips. Made of POM material, this durable cap creates smooth feeling. Get it for your G.R.1 RDA, it will help to bring good vaping experience for you!

      22mm: Ultem, Frosted, Red, Blue, Yellow, Orange, White
      (GR1 510 Tips (sold separately)

      24mm: Black, Frosted, Ultem
      (Includes Matching 810 Drip Tip)

      £ 9.99£ 13.50
    • The Coil Master Gremlin BF silicone bottle has a 6ml capacity with thicker walls providing perfect squeeze resistance while remaining soft and durable. The airtight 304 stainless steel threaded cap and platinum brand silicone tube ensure there will be no leaking while also allowing complete disassembly for cleaning. Manufactured with BPA free and FDA certified food grade silicone materials free of harmful chemicals. Designed to fit a variety of bottom feed squonk mods currently on the market.

       

      1 x Bottle
      Diameter: 18mm
      Height: 45mm

      £ 2.99
    • Designed by AmbitionZ VapeR and Hellvape the Aequitas RDA adopts innovative upside down barrel for 2 optional airflow. The four-post build deck makes building easy and fast.

      Features:
      • 24 mm diameter
      • Gold plated postless raised style deck
      • 2.5mm square post holes to handle any build you throw at it
      • 9mm by 2mm airflow slots
      • 2 options for airflow, top and bottom. Flip barrel upside down to make your choice
      • Flat head and allen key screws included
      • 810 resin drip tip,810 derlin drip tip & 510 stainless steel adapter included
      • Gold plated squonk pin included
      • Line up protruding lock on deck with opposite on barrel to properly align barrel to deck

      £ 32.99 £ 9.99
    • The iconic Purge deck has been redesigned as the Carnage V1 RDA.

      The two post system allows for easy builds with 2 large posts. The cap has a new design which now features an adjustable airflow.

      This 25mm RDA has a solid copper 510 pin with a silver plated squonk pin included and extra o-rings.

      Features:
      • 25mm
      • Adjustable airflow
      • Squonk compatible ( once pin is installed )
      • Ultem drip tip ( compatible with Purge / Kennedy / Goon / Comp lyfe drip tips )
      • Solid copper 510
      • Brass
      • Two post design
      • Deep juice well
      • Engraved carnage logo

      £ 69.99 £ 59.99
    • The Revenger X is so immersive that the device itself disappears into the experience. The mechanical buttons now give way to a highly responsive touch buttons, bringing out the more integrated look of the IML interface. Built with OMNI Board 2.2, in addition to all the advanced settings and output modes, it now has a more friendly UI, and is easier to navigate for all vapers.

      Contents:

      • 1 x Vaporesso Revenger X Mod
      • 1 x Vaporesso NRG Tank
      • 1 x GT4 0.15ohm coil (pre-installed)
      • 1 x GT CCELL 0.5ohm coil
      • 1 x Spare Glass Section
      • 1 x Micro-USB Charging Cable
      • 1 x User Manual

      Replacement Coils NRG GT Cores

      £ 64.99
    • Introducing the new DS Dual 18650 Squonk Mod by Defiant Designs.

      Specifications:
      • 
      Anodised aluminium body and components
      • Dual or triple parallel 18650 configurations
      • Gold plated copper internals & negative contacts
      **The positive contact has been updated and now self-centers the companion components
      ***The negative contacts have been updated to a stronger design while maintaining their polarity protection
      • Two 10ml capacity bottles
      • Complete set of replacement internal and external Allen screws and O-rings
      • Two SS squonk caps and straw’s
      • Two travel inserts and caps for the bottles
      • Two spare magnets
      • 1.5mm allen driver
      • SS key for the negative battery contacts
      • Optional firmer spring for the fire button

      Rated 5.00 out of 5
      £ 125.00 £ 59.99
    • Introducing the new TS Dual and Triple 18650 Squonk Mod by Defiant Designs.

      Specifications:
      • Anodised aluminium body and components
      • Dual or triple parallel 18650 configurations
      • Gold plated copper internals & negative contacts
      **The positive contact has been updated and now self-centers the companion components
      ***The negative contacts have been updated to a stronger design while maintaining their polarity protection
      • Two 10ml capacity bottles
      • Complete set of replacement internal and external Allen screws and O-rings
      • Two SS squonk caps and straw’s
      • Two travel inserts and caps for the bottles
      • Two spare magnets
      • 1.5mm allen driver
      • SS key for the negative battery contacts
      • Optional firmer spring for the fire button

      Rated 5.00 out of 5
      £ 135.00 £ 69.99
    • Introducing the CS1 Squonk Mod, like no other the CS1 has special button features engineered to work with safety in mind. The sensor relies on the electrical properties of the human body to detect when the button is being touched by you, and not the things you carry in your pocket. Be at ease knowing your mod will work only where it needs to – in your hands.

      Specifications:
      • Low resistance PCB mounted MOSFET
      • 8ml soft silicone bottle
      • Single 18650 battery power source (not included)
      • Recommended coil resistance of .2 ohm
      • Capacitive Safety – The sensor relies on the electrical properties of the human body to detect when the button is being touched and/or pressed
      • Coloured LED battery indicator – Four color states to quickly and easily determine remaining charge of the batteries
      • Alumide body and anodised aluminium doors for optimal wear protection.
      • Three position master switch – With a flick of a switch, you can bypass the capacitive function or turn the mod off completely
      • Silicon wires – All wires in the CS1 are silicon-sheathed and meant for high current applications. These wires are super flexible, strong, and are rated
      for temperatures up to 200°C
      • Mitec switch – Flat, durable, stainless steel anti-vandalism button with IP54 protection classification and rated for 100,000 on/off cycles

      Cheaper Version S2 Squonk Mod (click here)

      Rated 5.00 out of 5
      £ 220.00 £ 199.99
    • Imagine every upgrade you wanted to make to the original TM24 RDA: Squonk Pin, Square Post Holes, Gear Top, Titanium Screws, 810 Tip Adapter… Well the TM24 Pro-Series brings you all of that and more. This RDA was modelled, tested and redesigned countless times. From the post engravings to the top cap fitment, even down to the packaging, careful attention to detail was put into this product and we think you’ll notice.

      All previous accessories for the TM24 are totally cross compatible with the Pro-Series.

      Product Features:
      Black, Blue, Gold & Matt Finishes
      • PVD Plated Stainless Steel Top Cap, AFC and Drip Tip
      Polished Stainless Steel
      • SS Top Cap, AFC and Drip Tip
      • Fully PVD Plated 304 Stainless Steel Deck and Posts
      • Ultem Chamber Reducer for Single Coil Performance
      • 810 Drip Tip Adapter Included
      • Titanium Phillips/Flat Head Hybrid Screws (Anodised Blue)
      • Gold Plated 1.5mm Hex Screws (Stainless Steel)
      • Deep Engraving on Posts, Deck and AFC
      • Matching PVD Plated Stainless Steel AFC + Drip Tip
      • Dual Coil Air Flow Control
      • 2mm x 12mm Dual Air Flow Slots
      • 4 x 2.9mm Square Post Holes
      • 304 Stainless Steel Construction
      • Gold Plated Brass Contact Pin
      • Gold Plated Stainless Steel BF/Squonk Pin (SS on Matt RDA’s)
      • Shorty Amber Ultem Drip Tip
      • Wide Bore Black Ultem Drip Tip
      • 1.5mm Hex Driver, Hex Screws and Spare O-Rings
      • PEEK Insulators
      • Colour Serialised

      New Eclipse Caps (Sold Separately)

      Rated 5.00 out of 5
      £ 44.99
×
×
×
×

Please Note: Cookies help us deliver the best experience, personalise content and analyse site traffic. If you continue to use this site, you consent to our use of cookies. Dismiss