No products in the basket.
Search Results: “mission xv”
Display:
Showing 1–16 of 18 results
-
£ 109.99
KB2 RBA By Mission XV has been engineered to fit a Boro Tank or DotTank and comes with 7 different Airflow options. The KB2 Nut helps secure your KB2, reduces connectivity problems, and allows you to swap airflow options on the fly.
Note: You need the KB2 RBA DotBoro Conversion Kit to use the KB2 RBA in a DotAIO Device.
Features:
• Body High Polished Stainless Steel
• Flat Head Grub Screws
• Air Flow Options: 1mm, 1.2mm, 2mm, 2.5mm, 3mm, 3.5mm, 4.3mm
• Spare Flat Head Grub Screws + O-Rings
• PEEK Insulators -
£ 75.00
KB2 RBA DotBoro Conversion Kit By Mission XV is a conversion kit that lets you use a KB2 RBA in a DotAIO device.
Features:
• Clear Acrylic DotBoro Tank
• Borosilicate Sliding Front Glass
• Threaded Chimney + Lower Collar
• Black Mission XV DotTip (Not for DotAIO V2 Lite)
• DotBoro Tool + Spare O-rings -
£ 44.99KB2 RBA DotBoro Tank By Mission XV is machined from delrin with a borosilicate front glass. Fits DotAIO devices and the KB2 RBA only. It also includes a Mission XV laser engraved stainless steel DotAIO Button.
-
£ 399.99
Astro Boro Mod By Mission XV has been well over 2 years in the making, and is their passion project. It is a Boro Tank Mod and features the Evolve DNA60 Chipset which is powered by a single 18650 battery.
It has a single piece aluminium chassis, aluminium accent panels and a magnetically attached aluminium battery door. The rocker switch design that Mission XV is known for uses two independent firing switches that allow the mod to be fired by pressing any part of the rocker switch. Their flush nut is a standard boro thread without an o-ring which prevents inner chimneys being pulled from the bridge when disassembling.
Features:
• Aerospace Aluminium Body, Type 3 Hard Anodised
• Silver Plated Brass Contacts
• PEEK Insulators & Replaceable Screws
• Evolv DNA 60 (int ver) Chipset
• Custom PCB & Batch Version Boot Screen
• 540g Operating Force Switch/Fire Button
• 3-Way Fire Button Upgrade Available
• Screen Glass Upgrade Available
• Switch & Screen Plate Upgrade Available
• Top & Bottom Plate Upgrade Available
• Single 18650 Battery (not included)
• Boro Tank, Bridge & Tip (not included)
• Dimensions 87mm x 52mm x 21mm
• Weight 110g (without battery)Please Note: No discount coupons accepted. This version is in black with a gunmetal screen and switch plate, photo attached.
-
£ 44.99Cosmos V2 Booster Tip (Integrated) By Mission XV has built-in threading that allows direct integrated connection to the Astro, Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap airflow inserts for a fully customised draw and style. It features an updated base without a bottom o-ring to reduce connectivity and coin slots to tighten the base.
The included swappable airflow inserts are placed in from the top, and the top part slides over to hold in place. The airflow insert bore diameters are are 4.5mm (without insert), 3mm, 2mm and 1.5mm.
Features:
• Stainless Steel
• Updated Threading
• Coin Slots To Tighten Tip
• Updated Base (no o-ring)
• Customisable Mid-piece & Tip
• Integrated Billet Box Threading
• 3mm, 2mm, 1.5mm Airflow Inserts
• 4.5mm Bore Without Airflow Inserts -
£ 44.99This unique Tip by Mission XV has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap the coloured mid-piece and tip as well as bore inserts for fully customised draw and style. It features an updated base without a bottom o-ring to reduce connectivity issues and lock locators for the base allows you to tighten your tip better with the mid-piece. Alternatively, there are coin slots to further tighten your tip if you wish.
The included swappable airflow inserts are placed in from the top, and the top part slides over to hold in place. The insert bore diameters are are 4.5mm (without insert), 3mm, 2mm and 1.5mm. Compatible with Mission XV Cosmos Sleeves.
Features:
• Updated Threading
• Stainless Steel & Delrin
• Updated Base (no o-ring)
• 3 x Stainless Bore Inserts
• Coin Slots To Tighten Tip
• Customisable Mid-piece & Tip
• Integrated Billet Box Threading -
£ 34.99
Cosmos Sleeve By Mission XV is an anodised aluminium sleeve that also requires a Booster or Ignition Tip and is available in colours to match the SpacePods.
Features:
• SpacePod Colours
• Anodised Aluminium -
£ 42.99
Booster Tip (Integrated) By Mission XV: A brand new successor to our popular Mission Tips.
This unique Tip has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices. It allows users to swap the coloured mid-piece and tip as well as bore inserts for fully customised draw and style. It features an updated base without a bottom o-ring to reduce connectivity issues and lock locators for the base allows you to tighten your tip better with the mid-piece. Alternatively, there are coin slots to further tighten your tip if you wish.
The included swappable airflow inserts are placed in from the top, and the top part slides over to hold in place. The insert bore diameters are are 4.5mm (without insert), 3mm, 2mm and 1.5mm. Compatible with Cosmos Sleeves by Mission XV
Features
• Updated Threading
• Stainless Steel & Delrin
• Updated Base (no o-ring)
• 3 x Stainless Bore Inserts
• Coin Slots To Tighten Tip
• Customisable Mid-piece & Tip
• Integrated Billet Box Threading -
£ 59.99 – £ 69.99
MXV EUC Bridge By Mission XV is a Billet Box Bridge adapter that allows you to use the Vaporesso EUC Coil head inside the standard Billet Box Boro Tank, not the A-Tank.
Choose from Stainless Steel or Gold
-
£ 22.99 – £ 37.99Orbit RBA replacement Tank. Includes food grade custom silicone refill bung.
-
£ 179.99 – £ 189.99Orbit RBA By Mission XV features a two-post lead trap design with wire cut outs and flat head screws, and you can remove the deck on the fly without having to remove the tank. The deck design prevents airlocks and provides maximum wicking with its wide channels, combined with side perforated wicking and front and right side (traditional) air inlet locations for all current and future boro devices. You can also completely seal your airflow to 0mm for storage.
We recommend the MTL kit for experiences from 1.5mm airflow and under.
Features:
• Surgical Grade Stainless Steel Deck
• Adjustable 0.1mm – 4.5mm Airflow
• 7mm Wide Deck Wicking Channels
• 6.5mm x 8.55mm Deck Build Space
• PCTG Smoked Tank + Silicone Fill Bung
• Aluminium Sprung Airflow Pin + Tool
• SS version has new media blasted finishChoose from SS Media Blasted or Limited Edition Gold.
-
£ 14.99
Orbit RBA MTL Kit. Blue Anodised Aluminium. Recommend if your airflow preference is 1.5mm and under.
-
£ 34.99This unique 510 Tip allows users to swap sleeves as well as bore inserts for fully customised draw and style.
The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.
The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.
Features:
• Visible Height: 13mm
• Body Diameter: 11mm
• Base Diameter: 13mm
• 4 x Stainless Bore Inserts -
£ 34.99This unique Drip Tip has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices, and allows users to swap sleeves as well as bore inserts for fully customised draw and style.
The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.
The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.
Features:
• Visible Height: 13mm
• Body Diameter: 11mm
• Base Diameter: 13mm
• 4 x Stainless Bore Inserts
• Integrated Billet Box Threading -
£ 34.99This unique 510 Tip allows users to swap sleeves as well as bore inserts for fully customised draw and style.
The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.
The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.
Features:
• Visible Height: 13mm
• Body Diameter: 11mm
• Base Diameter: 13mm
• 4 x Stainless Bore Inserts -
£ 34.99This unique Drip Tip has built-in threading that allows direct integrated connection to the Billet Box Rev 4, Delro, and other compatible devices, and allows users to swap sleeves as well as bore inserts for fully customised draw and style.
The included swappable airflow inserts are placed in the base from the top, and the sleeve slides over to hold in place. The insert bore diameters are 4.6mm (without insert), 4.5mm, 3.5mm, 2.5mm and 1.5mm.
The whistle style sleeve is made of PTFE (Teflon) for a smooth feel and prevents gunk build-up. The base is made of stainless steel, with o-rings to hold the sleeve in place, with knurling at the top of the base allowing for easy attachment and removal on devices.
Features:
• Visible Height: 13mm
• Body Diameter: 11mm
• Base Diameter: 13mm
• 4 x Stainless Bore Inserts
• Integrated Billet Box Threading
