No products in the basket.
Cthulhu Mods Diver RBA Boro Tank for the Cthulhu AIO Mod & Billet Box mods alike. Two chimneys for different coil building and liquids.
1. Quiet bottom airflow: True MTL configuration, with four air pins: 1.0mm, 1.2mm, 1.4mm, 1.8mm
2. Diver RBA works as an RDTA configuration. The coil is close to the drip tip for a better flavour.
3. Two chimneys for different coil building and liquids.
4. Super dome shape chimney for improved throat hit and superior flavour.
5. Diver RBA is fully compatible with Boro tanks.
6. Threaded 510 connector. No need for any adaptors.
• 4.2ml e-juice capacity
• Compatible For All Billet Box Styles Mods
• Compatible For PnP Coils
• Compatible For Aspire Nautilus Coils
• Elegant Design
• Compact Design
• Fit For Single DIY Coil Build
• Easy Coil Building
Six Airflow Pin & Seven Airflow Styles (0.8mm / 1.0mm / 1.5mm / 2.0mm /2.5mm / 3.5mm & 4.5mm Without Airflow Pin)
The SnailTank is an alternative to the Billet Box Boro Tank rev4.It consists of two main parts, a tank section and an adapter (base), plus some custom silicon gaskets. The tank is cross compatible with the VapeSnail tank, while the adapter (base) essentially takes the place of the VapeSnail deck to create a hosting base for the Boro bridges. The Tank section and adapter together create a form with an outer shape which is almost identical with the classic Boro tank.
The SnailTank can be refilled through a large refill hole placed at the front upper side. It allows access to the RBA deck even when almost full with juice, any time, in the case of VapeShell and all bridges with a similar collaboration between chimney and deck (non-threaded, not extra tight via o-ring intervention between the two parts). Last but not least, it features a Chimney Gasket, which is added on the top side of the tank section to adjust the hole to the diameter of Boro standard bridge chimneys and offer some extra advantages. Among other things, it seals with the AIO 510 nut, even if you remove the sealing o-ring that most nuts or hybrid drip tips have. This eliminates the usual pain when the chimney of the bridge is automatically lifted up while unscrewing the nut/hybrid drip tip, and the bad sealing that most hybrid drip tips present, either because of normal tear and wear, or due to bad choice of o-rings. It is advised to remove the hybrid drip tip o-ring or the 510 nut o-ring to enjoy the best from the SnailTank.
The Cthulhu AIO Box Mod Kit is finished with High End Aviation Grade Aluminum (body and panel), and powered with 91% high efficiency ATOM 60W chip. One of the most efficiency small chip on the market. Your battery will last longer.
The Cthulhu RBA AIO Box Mod Kit is compatible with Billet Box Drip tip adapter and Boro Tanks. The Cthulhu RBA AIO Box Mod Kit comes with 6.0ml tank and air flow inserts: 0.8mm, 1.2mm, 1.6mm, 2mm.
• VW: 1~60W
• Powered by 1 x 18650 battery (not included)
• Fully compatible with Boro Tanks
• Compatible with Billet Box Drip tip adapter
• Made Entirely from Aviation Aluminum (Body and panels)
• The Most Compact smallest 18650 Boro device on the market
• Lightweight: For a daily use device, designed to reduce weight
• To save power, the OLED screen can be turned off
• Fully regulated high efficiency ATOM 60W chip.
• (VW / VV / TC / TCR / BYPASS)
• LED light on the fire button to indicate if the device is working
• Fire button LED light can be turned on or off
• Comes with MTL RBA and Boro style tank & adapter for Aspire Nautilus coils (coil not included)
• Air flow inserts: 0.8mm, 1.2mm, 1.6mm, 2mm
The VapeShell is Atmizone’s RBA bridge concept for the Billet Box rev4 Boro tank and compatible tank systems. From loose lung hit to MTL, it will suit your vaping habits, with the classic air flow pins and air flow control ring included out of the box.
The optional purchase of the MTL Air Flow Pin Kit allows a true MTL experience, with extra precise adjustment using the AFC ring.
• 2mm, 2.5mm, 3mm, 3.5mm Dia Air Flow Tuning Pins~
• No Pin Air Flow Dia 4mm. Fine Adjustment With AFC Ring
• 2 x 2.5mm E-liquid Intake Holes At Base Of Deck
• 5.5mm Maximum Coil Height In Chamber
• 2.5mm Pan Head Phillips Post Screws
• SS316F & PEEK Insulators
The Orbit RBA features a two-post lead trap design with wire cutouts and flat head screws, and you can remove the deck on the fly without having to remove the tank. The deck design prevents airlocks and provides maximum wicking with its wide channels, combined with side perforated wicking and front and right side (traditional) air inlet locations for all current and future boro devices. You can also completely seal your airflow to 0mm for storage.
We recommend the MTL kit for experiences from 1.5mm airflow and under.
• Surgical Grade Stainless Steel Deck
• Adjustable 0.1mm – 4.5mm Airflow
• 7mm Wide Deck Wicking Channels
• 6.5mm x 8.55mm Deck Build Space
• PCTG Clear Tank + Silicone Fill Bung
• Aluminium Sprung Airflow Pin + Tool
Choose from SS or Limited Edition Gold.
The VapeSnail is Atmizoo’s new rebuildable atomiser concept for Billet Box and Boro compatible AIO’s. With its amazing potential, real time access to deck, real time fixed air flow swap ability, easy refill system, easy rebuilding and complete package overall, the VapeSnail is more than just another rebuildable bridge, introducing a unique RTA experience to the users of Billet Box and Boro compatible AIO’s.
• PCTG Tank Allows Real Time Deck Access
• Air Flow Tuning Via 5 Fixed AFC Tubes
• 2mm, 2.5mm, 3mm, 3.5mm Hole Dia AFC Tubes
• No Air Flow Tuning Tube Dia 4mm Used With Pins
• 1mm, 1.2mm, 1.5mm, 1.8mm Dia Air Flow Tuning Pins
• 5.2mm – 6mm Maximum Coil Height In Chamber
• 2.5mm Pan Head Phillips Post Screws
• SS316F & PEEK Insulators
The Tripod is Atmizoo’s new approach to 22mm RTA design for single coil setups. It offers an unparalleled vaping experience focusing on performance, versatility and ergonomics. With its enhanced flavour and vapour production, potential for variable specs, instant real time access to deck, instant top refill system, easy rebuilding and attention to details, the Tripod is one step ahead of most RTAs out there.
• 22mm Outside Diameter SS316F
• Air Flow Tuning Pins: 1mm, 1.2mm, 1.5mm, 1.8mm Dia
• AFC Ring Adjusts From 0 – 4mm Dia
• 2ml Borosilicate Glass Tank. 3.4ml Extension Kit Option
• 2 Part Screw In Acetal 510 Drip Tip. Inner Diameter 4mm
• 2.5mm Pan Head Phillips Post Screws & PEEK Insulators
• Height With 510 – 39mm, Without 510 – 47mm
• Weight 56g
SS Matte is a light-brushed matte / satin finish, close to the natural appearance of CNC processed Stainless Steel.
SS Ice Matte is a medium blasted finish with special SS beams, darker (more dull) and more greyish compared to SS matte. The SS Ice Matte is a dynamic finish. It is not always the same and it gets darker over time. Also more prone to scratches compared to SS Matte.
DLC Carbon Black is a DLC treated special edition of Atmizone’s successful RTA.